[PATCH v2 8/9] ARM: dts: aspeed: Correctly order UART nodes

Andrew Jeffery andrew at aj.id.au
Wed Oct 4 16:37:17 PDT 2017


On Wed, 2017-10-04 at 17:19 +1030, Joel Stanley wrote:
> Order them all by address.
> 
> Signed-off-by: Joel Stanley <joel at jms.id.au>

Reviewed-by: Andrew Jeffery <andrew at aj.id.au>

> ---
>  arch/arm/boot/dts/aspeed-g4.dtsi | 48 +++++++++++++++---------------
> -
>  arch/arm/boot/dts/aspeed-g5.dtsi | 61 ++++++++++++++++++++--------
> ------------
>  2 files changed, 54 insertions(+), 55 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi
> b/arch/arm/boot/dts/aspeed-g4.dtsi
> index a549413bda3f..4125e07f22f9 100644
> --- a/arch/arm/boot/dts/aspeed-g4.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
> @@ -183,6 +183,27 @@
>  				clock-names = "PCLK";
>  			};
>  
> +			uart1: serial at 1e783000 {
> +				compatible = "ns16550a";
> +				reg = <0x1e783000 0x1000>;
> +				reg-shift = <2>;
> +				interrupts = <9>;
> +				clocks = <&clk_uart>;
> +				no-loopback-test;
> +				status = "disabled";
> +			};
> +
> +			uart5: serial at 1e784000 {
> +				compatible = "ns16550a";
> +				reg = <0x1e784000 0x1000>;
> +				reg-shift = <2>;
> +				interrupts = <10>;
> +				clocks = <&clk_uart>;
> +				current-speed = <38400>;
> +				no-loopback-test;
> +				status = "disabled";
> +			};
> +
>  			wdt1: wdt at 1e785000 {
>  				compatible = "aspeed,ast2400-wdt";
>  				reg = <0x1e785000 0x1c>;
> @@ -197,11 +218,11 @@
>  				status = "disabled";
>  			};
>  
> -			uart1: serial at 1e783000 {
> +			uart6: serial at 1e787000 {
>  				compatible = "ns16550a";
> -				reg = <0x1e783000 0x1000>;
> +				reg = <0x1e787000 0x1000>;
>  				reg-shift = <2>;
> -				interrupts = <9>;
> +				interrupts = <10>;
>  				clocks = <&clk_uart>;
>  				no-loopback-test;
>  				status = "disabled";
> @@ -237,27 +258,6 @@
>  				status = "disabled";
>  			};
>  
> -			uart5: serial at 1e784000 {
> -				compatible = "ns16550a";
> -				reg = <0x1e784000 0x1000>;
> -				reg-shift = <2>;
> -				interrupts = <10>;
> -				clocks = <&clk_uart>;
> -				current-speed = <38400>;
> -				no-loopback-test;
> -				status = "disabled";
> -			};
> -
> -			uart6: serial at 1e787000 {
> -				compatible = "ns16550a";
> -				reg = <0x1e787000 0x1000>;
> -				reg-shift = <2>;
> -				interrupts = <10>;
> -				clocks = <&clk_uart>;
> -				no-loopback-test;
> -				status = "disabled";
> -			};
> -
>  			i2c: i2c at 1e78a000 {
>  				compatible = "simple-bus";
>  				#address-cells = <1>;
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi
> b/arch/arm/boot/dts/aspeed-g5.dtsi
> index de2dafa71651..61cc2d25143a 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -227,6 +227,26 @@
>  				clock-names = "PCLK";
>  			};
>  
> +			uart1: serial at 1e783000 {
> +				compatible = "ns16550a";
> +				reg = <0x1e783000 0x1000>;
> +				reg-shift = <2>;
> +				interrupts = <9>;
> +				clocks = <&clk_uart>;
> +				no-loopback-test;
> +				status = "disabled";
> +			};
> +
> +			uart5: serial at 1e784000 {
> +				compatible = "ns16550a";
> +				reg = <0x1e784000 0x1000>;
> +				reg-shift = <2>;
> +				interrupts = <10>;
> +				clocks = <&clk_uart>;
> +				current-speed = <38400>;
> +				no-loopback-test;
> +				status = "disabled";
> +			};
>  
>  			wdt1: wdt at 1e785000 {
>  				compatible = "aspeed,ast2500-wdt";
> @@ -247,16 +267,6 @@
>  				status = "disabled";
>  			};
>  
> -			uart1: serial at 1e783000 {
> -				compatible = "ns16550a";
> -				reg = <0x1e783000 0x1000>;
> -				reg-shift = <2>;
> -				interrupts = <9>;
> -				clocks = <&clk_uart>;
> -				no-loopback-test;
> -				status = "disabled";
> -			};
> -
>  			lpc: lpc at 1e789000 {
>  				compatible = "aspeed,ast2500-lpc",
> "simple-mfd";
>  				reg = <0x1e789000 0x1000>;
> @@ -287,6 +297,16 @@
>  				};
>  			};
>  
> +			uart6: serial at 1e787000 {
> +				compatible = "ns16550a";
> +				reg = <0x1e787000 0x1000>;
> +				reg-shift = <2>;
> +				interrupts = <10>;
> +				clocks = <&clk_uart>;
> +				no-loopback-test;
> +				status = "disabled";
> +			};
> +
>  			uart2: serial at 1e78d000 {
>  				compatible = "ns16550a";
>  				reg = <0x1e78d000 0x1000>;
> @@ -317,27 +337,6 @@
>  				status = "disabled";
>  			};
>  
> -			uart5: serial at 1e784000 {
> -				compatible = "ns16550a";
> -				reg = <0x1e784000 0x1000>;
> -				reg-shift = <2>;
> -				interrupts = <10>;
> -				clocks = <&clk_uart>;
> -				current-speed = <38400>;
> -				no-loopback-test;
> -				status = "disabled";
> -			};
> -
> -			uart6: serial at 1e787000 {
> -				compatible = "ns16550a";
> -				reg = <0x1e787000 0x1000>;
> -				reg-shift = <2>;
> -				interrupts = <10>;
> -				clocks = <&clk_uart>;
> -				no-loopback-test;
> -				status = "disabled";
> -			};
> -
>  			i2c: i2c at 1e78a000 {
>  				compatible = "simple-bus";
>  				#address-cells = <1>;
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171005/a288ad9d/attachment-0001.sig>


More information about the linux-arm-kernel mailing list