[PATCH 5/8] ARM: dts: aspeed-palmetto: Add I2C devices

Andrew Jeffery andrew at aj.id.au
Tue Oct 3 22:08:57 PDT 2017


On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote:
> Enable the buses that are in use and the devices that are attached.
> Currently that includes the battery backed RTC, temperature
> measurement
> and EEPROM.
> 
> Some of these buses are for hotplugged cards, such as PCIe cards.
> Others do not yet have upstream drivers, so there are no devices
> attached.
> 
> Signed-off-by: Joel Stanley <joel at jms.id.au>

Reviewed-by: Andrew Jeffery <andrew at aj.id.au>

> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 48
> +++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> index 112551766275..e387c80b7f4f 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
> @@ -61,3 +61,51 @@
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_rmii1_default>;
>  };
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	eeprom at 50 {
> +		compatible = "atmel,24c256";
> +		reg = <0x50>;
> +		pagesize = <64>;
> +	};
> +
> +	rtc at 68 {
> +		compatible = "dallas,ds3231";
> +		reg = <0x68>;
> +	};
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +
> +	tmp423 at 4c {
> +		compatible = "ti,tmp423";
> +		reg = <0x4c>;
> +	};
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +};
> +
> +&i2c4 {
> +	status = "okay";
> +};
> +
> +&i2c5 {
> +	status = "okay";
> +};
> +
> +&i2c6 {
> +	status = "okay";
> +};
> +
> +&i2c7 {
> +	status = "okay";
> +};
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171004/49fcc8a9/attachment.sig>


More information about the linux-arm-kernel mailing list