[linux-sunxi] Re: [RFC PATCH 02/11] drm: sun4i: add support for H3 mixers

Icenowy Zheng icenowy at aosc.io
Fri May 19 10:49:58 PDT 2017



于 2017年5月20日 GMT+08:00 上午1:47:29, Maxime Ripard <maxime.ripard at free-electrons.com> 写到:
>On Thu, May 18, 2017 at 12:43:45AM +0800, Icenowy Zheng wrote:
>> From: Icenowy Zheng <icenowy at aosc.xyz>
>> 
>> Allwinner H3 SoC has two mixers, one has 1 VI channel and 3 UI
>channels,
>> and the other has 1 VI and 1 UI.
>> 
>> Add support for these two variants.
>> 
>> Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
>> ---
>>  drivers/gpu/drm/sun4i/sun8i_mixer.c | 18 ++++++++++++++++++
>>  1 file changed, 18 insertions(+)
>> 
>> diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c
>b/drivers/gpu/drm/sun4i/sun8i_mixer.c
>> index cb193c5f1686..d658a3a8159a 100644
>> --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
>> +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
>> @@ -390,11 +390,29 @@ static const struct sun8i_mixer_cfg
>sun8i_v3s_mixer_cfg = {
>>  	.ui_num = 1,
>>  };
>>  
>> +static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = {
>> +	.vi_num = 1,
>> +	.ui_num = 3,
>> +};
>> +
>> +static const struct sun8i_mixer_cfg sun8i_h3_mixer1_cfg = {
>> +	.vi_num = 1,
>> +	.ui_num = 1,
>> +};
>> +
>>  static const struct of_device_id sun8i_mixer_of_table[] = {
>>  	{
>>  		.compatible = "allwinner,sun8i-v3s-de2-mixer",
>>  		.data = &sun8i_v3s_mixer_cfg,
>>  	},
>> +	{
>> +		.compatible = "allwinner,sun8i-h3-de2-mixer0",
>> +		.data = &sun8i_h3_mixer0_cfg
>> +	},
>> +	{
>> +		.compatible = "allwinner,sun8i-h3-de2-mixer1",
>> +		.data = &sun8i_h3_mixer1_cfg
>> +	},
>
>So the only difference between the two is the number of ui planes?

Not only., but currently we only implemented this.

More functions differ, but we still don't support them...

>
>Why not create a property to give the number then, instead of a
>compatible?
>
>Maxime



More information about the linux-arm-kernel mailing list