[PATCH V3 1/3] clk: add clk_bulk_get accessories

Dong Aisheng aisheng.dong at nxp.com
Fri May 19 06:49:04 PDT 2017


These helper function allows drivers to get several clk consumers in
one operation. If any of the clk cannot be acquired then any clks
that were got will be put before returning to the caller.

This can relieve the driver owners' life who needs to handle many clocks,
as well as each clock error reporting.

Cc: Michael Turquette <mturquette at baylibre.com>
Cc: Stephen Boyd <sboyd at codeaurora.org>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Geert Uytterhoeven <geert at linux-m68k.org>
Cc: "Rafael J. Wysocki" <rjw at rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar at linaro.org>
Cc: Mark Brown <broonie at kernel.org>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Sascha Hauer <kernel at pengutronix.de>
Cc: Anson Huang <anson.huang at nxp.com>
Cc: Robin Gong <yibin.gong at nxp.com>
Cc: Bai Ping <ping.bai at nxp.com>
Cc: Leonard Crestez <leonard.crestez at nxp.com>
Cc: Octavian Purdila <octavian.purdila at nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong at nxp.com>
---
ChangeLog:
v2->v3:
 * release resource in reversed order in case an error according to
   Geert Uytterhoeven's suggestion

v1->v2:
 * fix comments of clk_bulk_get that only one dev is possible with the API.
 * Comments 'bulk of clock source' replaced by 'set of clks'
 * Mark clk_bulk_data structure as const for the following API:
   clk_bulk_{enable|disable}
   clk_bulk_{prepare|unprepare}
   Except clk_bulk_{get|put} which needs update clk_bulk_date
 * Introduce clk-bulk.c to centrally handle bulk_clks, especially moving
   platform independant clk_bulk_{get|put} out of clkdev.c which depends on
   CONFIG_CLKDEV_LOOKUP and is used in devm_clk_bulk_get(clk-devres.c) later
   which is independant of CONFIG_CLKDEV_LOOKUP.
 * Should call clk_disable in error path of clk_bulk_enable
 * Fix a build warning of clk_bulk_get in !CONFIG_COMMON_CLK case
 * Add __must_check anatation in function definition as well to make it
   more explicitly
---
 drivers/clk/Makefile   |   2 +-
 drivers/clk/clk-bulk.c | 157 +++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk.h    | 111 ++++++++++++++++++++++++++++++++++
 3 files changed, 269 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/clk-bulk.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index c19983a..ed1e99f 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,5 +1,5 @@
 # common clock types
-obj-$(CONFIG_HAVE_CLK)		+= clk-devres.o
+obj-$(CONFIG_HAVE_CLK)		+= clk-devres.o clk-bulk.o
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-divider.o
diff --git a/drivers/clk/clk-bulk.c b/drivers/clk/clk-bulk.c
new file mode 100644
index 0000000..c834f5a
--- /dev/null
+++ b/drivers/clk/clk-bulk.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * Dong Aisheng <aisheng.dong at nxp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/export.h>
+
+void clk_bulk_put(int num_clks, struct clk_bulk_data *clks)
+{
+	while (--num_clks >= 0) {
+		clk_put(clks[num_clks].clk);
+		clks[num_clks].clk = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(clk_bulk_put);
+
+int __must_check clk_bulk_get(struct device *dev, int num_clks,
+			      struct clk_bulk_data *clks)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < num_clks; i++)
+		clks[i].clk = NULL;
+
+	for (i = 0; i < num_clks; i++) {
+		clks[i].clk = clk_get(dev, clks[i].id);
+		if (IS_ERR(clks[i].clk)) {
+			ret = PTR_ERR(clks[i].clk);
+			dev_err(dev, "Failed to get clk '%s': %d\n",
+				clks[i].id, ret);
+			clks[i].clk = NULL;
+			goto err;
+		}
+	}
+
+	return 0;
+
+err:
+	clk_bulk_put(i, clks);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_bulk_get);
+
+#ifdef CONFIG_HAVE_CLK_PREPARE
+
+/**
+ * clk_bulk_unprepare - undo preparation of a set of clock sources
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table being unprepared
+ *
+ * clk_bulk_unprepare may sleep, which differentiates it from clk_bulk_disable.
+ * Returns 0 on success, -EERROR otherwise.
+ */
+void clk_bulk_unprepare(int num_clks, const struct clk_bulk_data *clks)
+{
+	while (--num_clks >= 0)
+		clk_unprepare(clks[num_clks].clk);
+}
+EXPORT_SYMBOL_GPL(clk_bulk_unprepare);
+
+/**
+ * clk_bulk_prepare - prepare a set of clocks
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table being prepared
+ *
+ * clk_bulk_prepare may sleep, which differentiates it from clk_bulk_enable.
+ * Returns 0 on success, -EERROR otherwise.
+ */
+int __must_check clk_bulk_prepare(int num_clks,
+				  const struct clk_bulk_data *clks)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < num_clks; i++) {
+		ret = clk_prepare(clks[i].clk);
+		if (ret) {
+			pr_err("Failed to prepare clk '%s': %d\n",
+				clks[i].id, ret);
+			goto err;
+		}
+	}
+
+	return 0;
+
+err:
+	clk_bulk_unprepare(i, clks);
+
+	return  ret;
+}
+
+#endif /* CONFIG_HAVE_CLK_PREPARE */
+
+/**
+ * clk_bulk_disable - gate a set of clocks
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table being gated
+ *
+ * clk_bulk_disable must not sleep, which differentiates it from
+ * clk_bulk_unprepare. clk_bulk_disable must be called before
+ * clk_bulk_unprepare.
+ */
+void clk_bulk_disable(int num_clks, const struct clk_bulk_data *clks)
+{
+
+	while (--num_clks >= 0)
+		clk_disable(clks[num_clks].clk);
+}
+EXPORT_SYMBOL_GPL(clk_bulk_disable);
+
+/**
+ * clk_bulk_enable - ungate a set of clocks
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table being ungated
+ *
+ * clk_bulk_enable must not sleep
+ * Returns 0 on success, -EERROR otherwise.
+ */
+int __must_check clk_bulk_enable(int num_clks, const struct clk_bulk_data *clks)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < num_clks; i++) {
+		ret = clk_enable(clks[i].clk);
+		if (ret) {
+			pr_err("Failed to enable clk '%s': %d\n",
+				clks[i].id, ret);
+			goto err;
+		}
+	}
+
+	return 0;
+
+err:
+	clk_bulk_disable(i, clks);
+
+	return  ret;
+}
+EXPORT_SYMBOL_GPL(clk_bulk_enable);
diff --git a/include/linux/clk.h b/include/linux/clk.h
index e9d36b3..1201944 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -77,6 +77,21 @@ struct clk_notifier_data {
 	unsigned long		new_rate;
 };
 
+/**
+ * struct clk_bulk_data - Data used for bulk clk operations.
+ *
+ * @id: clock consumer ID
+ * @clk: struct clk * to store the associated clock
+ *
+ * The CLK APIs provide a series of clk_bulk_() API calls as
+ * a convenience to consumers which require multiple clks.  This
+ * structure is used to manage data for these calls.
+ */
+struct clk_bulk_data {
+	const char		*id;
+	struct clk		*clk;
+};
+
 #ifdef CONFIG_COMMON_CLK
 
 /**
@@ -185,12 +200,20 @@ static inline bool clk_is_match(const struct clk *p, const struct clk *q)
  */
 #ifdef CONFIG_HAVE_CLK_PREPARE
 int clk_prepare(struct clk *clk);
+int __must_check clk_bulk_prepare(int num_clks,
+				  const struct clk_bulk_data *clks);
 #else
 static inline int clk_prepare(struct clk *clk)
 {
 	might_sleep();
 	return 0;
 }
+
+static inline int clk_bulk_prepare(int num_clks, struct clk_bulk_data *clks)
+{
+	might_sleep();
+	return 0;
+}
 #endif
 
 /**
@@ -204,11 +227,16 @@ static inline int clk_prepare(struct clk *clk)
  */
 #ifdef CONFIG_HAVE_CLK_PREPARE
 void clk_unprepare(struct clk *clk);
+void clk_bulk_unprepare(int num_clks, const struct clk_bulk_data *clks);
 #else
 static inline void clk_unprepare(struct clk *clk)
 {
 	might_sleep();
 }
+static inline void clk_bulk_unprepare(int num_clks, struct clk_bulk_data *clks)
+{
+	might_sleep();
+}
 #endif
 
 #ifdef CONFIG_HAVE_CLK
@@ -230,6 +258,29 @@ static inline void clk_unprepare(struct clk *clk)
 struct clk *clk_get(struct device *dev, const char *id);
 
 /**
+ * clk_bulk_get - lookup and obtain a number of references to clock producer.
+ * @dev: device for clock "consumer"
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * This helper function allows drivers to get several clk consumers in one
+ * operation. If any of the clk cannot be acquired then any clks
+ * that were obtained will be freed before returning to the caller.
+ *
+ * Returns 0 if all clocks specified in clk_bulk_data table are obtained
+ * successfully, or valid IS_ERR() condition containing errno.
+ * The implementation uses @dev and @clk_bulk_data.id to determine the
+ * clock consumer, and thereby the clock producer.
+ * The clock returned is stored in each @clk_bulk_data.clk field.
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_bulk_get should not be called from within interrupt context.
+ */
+int __must_check clk_bulk_get(struct device *dev, int num_clks,
+			      struct clk_bulk_data *clks);
+
+/**
  * devm_clk_get - lookup and obtain a managed reference to a clock producer.
  * @dev: device for clock "consumer"
  * @id: clock consumer ID
@@ -279,6 +330,18 @@ struct clk *devm_get_clk_from_child(struct device *dev,
 int clk_enable(struct clk *clk);
 
 /**
+ * clk_bulk_enable - inform the system when the set of clks should be running.
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * May be called from atomic contexts.
+ *
+ * Returns success (0) or negative errno.
+ */
+int __must_check clk_bulk_enable(int num_clks,
+				 const struct clk_bulk_data *clks);
+
+/**
  * clk_disable - inform the system when the clock source is no longer required.
  * @clk: clock source
  *
@@ -295,6 +358,24 @@ int clk_enable(struct clk *clk);
 void clk_disable(struct clk *clk);
 
 /**
+ * clk_bulk_disable - inform the system when the set of clks is no
+ *		      longer required.
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * Inform the system that a set of clks is no longer required by
+ * a driver and may be shut down.
+ *
+ * May be called from atomic contexts.
+ *
+ * Implementation detail: if the set of clks is shared between
+ * multiple drivers, clk_bulk_enable() calls must be balanced by the
+ * same number of clk_bulk_disable() calls for the clock source to be
+ * disabled.
+ */
+void clk_bulk_disable(int num_clks, const struct clk_bulk_data *clks);
+
+/**
  * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
  *		  This is only valid once the clock source has been enabled.
  * @clk: clock source
@@ -314,6 +395,19 @@ unsigned long clk_get_rate(struct clk *clk);
 void clk_put(struct clk *clk);
 
 /**
+ * clk_bulk_put	- "free" the clock source
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * Note: drivers must ensure that all clk_bulk_enable calls made on this
+ * clock source are balanced by clk_bulk_disable calls prior to calling
+ * this function.
+ *
+ * clk_bulk_put should not be called from within interrupt context.
+ */
+void clk_bulk_put(int num_clks, struct clk_bulk_data *clks);
+
+/**
  * devm_clk_put	- "free" a managed clock source
  * @dev: device used to acquire the clock
  * @clk: clock source acquired with devm_clk_get()
@@ -445,6 +539,12 @@ static inline struct clk *clk_get(struct device *dev, const char *id)
 	return NULL;
 }
 
+static inline int clk_bulk_get(struct device *dev, int num_clks,
+			       struct clk_bulk_data *clks)
+{
+	return 0;
+}
+
 static inline struct clk *devm_clk_get(struct device *dev, const char *id)
 {
 	return NULL;
@@ -458,6 +558,8 @@ static inline struct clk *devm_get_clk_from_child(struct device *dev,
 
 static inline void clk_put(struct clk *clk) {}
 
+static inline void clk_bulk_put(int num_clks, struct clk_bulk_data *clks) {}
+
 static inline void devm_clk_put(struct device *dev, struct clk *clk) {}
 
 static inline int clk_enable(struct clk *clk)
@@ -465,8 +567,17 @@ static inline int clk_enable(struct clk *clk)
 	return 0;
 }
 
+static inline int clk_bulk_enable(int num_clks, struct clk_bulk_data *clks)
+{
+	return 0;
+}
+
 static inline void clk_disable(struct clk *clk) {}
 
+
+static inline void clk_bulk_disable(int num_clks,
+				    struct clk_bulk_data *clks) {}
+
 static inline unsigned long clk_get_rate(struct clk *clk)
 {
 	return 0;
-- 
2.7.4




More information about the linux-arm-kernel mailing list