[PATCH v3 3/6] dt-bindings: bus: Add documentation for the Technologic Systems NBUS

Sebastien Bourdelin sebastien.bourdelin at savoirfairelinux.com
Fri May 5 12:32:56 PDT 2017


Add binding documentation for the Technologic Systems NBUS that is used
to interface with peripherals in the FPGA of the TS-4600 SoM.

Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin at savoirfairelinux.com>
---
Changes v2 -> v3:
  - rebase on master
  - fix typo (suggested by Rob Herring)

Changes v1 -> v2:
  - rebase on master
  - remove the simple-bus compatibility as the root node will now
  populate child nodes (suggested by Rob Herring)
  - use the ts vendor prefix for gpios (suggested by Rob Herring)
---
 Documentation/devicetree/bindings/bus/ts-nbus.txt | 50 +++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/ts-nbus.txt

diff --git a/Documentation/devicetree/bindings/bus/ts-nbus.txt b/Documentation/devicetree/bindings/bus/ts-nbus.txt
new file mode 100644
index 000000000000..905600adfb64
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ts-nbus.txt
@@ -0,0 +1,50 @@
+Technologic Systems NBUS
+
+The NBUS is a bus used to interface with peripherals in the Technologic
+Systems FPGA on the TS-4600 SoM.
+
+Required properties :
+ - compatible		: "technologic,ts-nbus"
+ - #address-cells	: must be 1
+ - #size-cells		: must be 0
+ - pwms			: The PWM bound to the FPGA
+ - ts-data-gpios	: The 8 GPIO pins connected to the data lines on the FPGA
+ - ts-csn-gpios		: The GPIO pin connected to the csn line on the FPGA
+ - ts-txrx-gpios	: The GPIO pin connected to the txrx line on the FPGA
+ - ts-strobe-gpios	: The GPIO pin connected to the stobe line on the FPGA
+ - ts-ale-gpios		: The GPIO pin connected to the ale line on the FPGA
+ - ts-rdy-gpios		: The GPIO pin connected to the rdy line on the FPGA
+
+Child nodes:
+
+The NBUS node can contain zero or more child nodes representing peripherals
+on the bus.
+
+Example:
+
+	nbus {
+		compatible = "technologic,ts-nbus";
+		pinctrl-0 = <&nbus_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pwms = <&pwm 2 83>;
+		ts-data-gpios   = <&gpio0 0 GPIO_ACTIVE_HIGH
+				   &gpio0 1 GPIO_ACTIVE_HIGH
+				   &gpio0 2 GPIO_ACTIVE_HIGH
+				   &gpio0 3 GPIO_ACTIVE_HIGH
+				   &gpio0 4 GPIO_ACTIVE_HIGH
+				   &gpio0 5 GPIO_ACTIVE_HIGH
+				   &gpio0 6 GPIO_ACTIVE_HIGH
+				   &gpio0 7 GPIO_ACTIVE_HIGH>;
+		ts-csn-gpios    = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		ts-txrx-gpios   = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+		ts-strobe-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+		ts-ale-gpios    = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		ts-rdy-gpios    = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+
+		watchdog at 2a {
+			compatible = "...";
+
+			/* ... */
+		};
+	};
-- 
2.12.0




More information about the linux-arm-kernel mailing list