[PATCH 2/2] ARM: dts: imx7: add USDHC NAND clock to SDHC instances

Stefan Agner stefan at agner.ch
Wed Mar 29 17:50:29 PDT 2017


The USDHC instances need the USDHC NAND clock in order to operate.
Add the clock as ahb bus clock.

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 arch/arm/boot/dts/imx7s.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 5d3a43b8de20..5794febb19a4 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -936,7 +936,7 @@
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -948,7 +948,7 @@
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -960,7 +960,7 @@
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-- 
2.12.1




More information about the linux-arm-kernel mailing list