[PATCH v4 2/8] phy: sun4i-usb: change PHYCTL register clearing code

[Icenowy Zheng]

It seems that all SoCs after A33 (including A33) need the PHYCTL
register to be cleared before writing to it. These SoCs all have another
feature: PHYCTL register is at 0x10, not 0x04.

Change PHYCTL register clearing code to judge whether clearing is needed
based on the PHYCTL offset.

Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
---
New patch in v4.

 drivers/phy/phy-sun4i-usb.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index a21b5f24a340..62b4d25448c6 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -188,10 +188,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
 
 	spin_lock_irqsave(&phy_data->reg_lock, flags);
 
-	if (phy_data->cfg->type == sun8i_a33_phy ||
-	    phy_data->cfg->type == sun50i_a64_phy ||
-	    phy_data->cfg->type == sun8i_v3s_phy) {
-		/* A33 or A64 needs us to set phyctl to 0 explicitly */
+	if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) {
+		/* SoCs newer than A33 need us to set phyctl to 0 explicitly */
 		writel(0, phyctl);
 	}
 
-- 
2.12.0