[PATCH v2 0/3] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

Bartlomiej Zolnierkiewicz b.zolnierkie at samsung.com
Tue Mar 14 09:36:51 PDT 2017


Hi,

This patchset adds Palmchip BK3710 IDE controller driver to
libata and switches ARM/DaVinci to use it (instead of the old
IDE driver).

Sekhar, please check that it still works after changes, thanks.

Changes since v1
(https://www.spinics.net/lists/arm-kernel/msg567442.html):
- addressed review comments from Sergei Shtylyov
- fixed cycle_time unitialized variable issue

Changes since v0.1 draft patch version
(https://www.spinics.net/lists/arm-kernel/msg566932.html):
- fixed cycle_time build warning
- added platform support fixes from Sekhar
- added defconfig changes from Sekhar
- preserved platform support for the old IDE driver
- split it on 3 patches

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


Bartlomiej Zolnierkiewicz (1):
  ata: add Palmchip BK3710 PATA controller driver

Sekhar Nori (2):
  ARM: davinci: add pata_bk3710 libata driver support
  ARM: davinci_all_defconfig: convert to use libata PATA

 arch/arm/configs/davinci_all_defconfig    |   4 +-
 arch/arm/mach-davinci/board-dm644x-evm.c  |   3 +-
 arch/arm/mach-davinci/board-dm646x-evm.c  |   3 +-
 arch/arm/mach-davinci/board-neuros-osd2.c |   3 +-
 drivers/ata/Kconfig                       |   9 +
 drivers/ata/Makefile                      |   1 +
 drivers/ata/pata_bk3710.c                 | 386 ++++++++++++++++++++++++++++++
 7 files changed, 403 insertions(+), 6 deletions(-)
 create mode 100644 drivers/ata/pata_bk3710.c

-- 
1.9.1




More information about the linux-arm-kernel mailing list