[PATCH v5 00/39] i.MX Media Driver

Steve Longerbeam steve_longerbeam at mentor.com
Mon Mar 13 16:37:06 PDT 2017



On 03/13/2017 01:16 AM, Russell King - ARM Linux wrote:
> On Sun, Mar 12, 2017 at 09:26:41PM -0700, Steve Longerbeam wrote:
>> On 03/12/2017 01:22 PM, Russell King - ARM Linux wrote:
>>> What I had was this patch for your v3.  I never got to testing your
>>> v4 because of the LP-11 problem.
>>>
>>> In v5, you've changed to propagate the ipu_cpmem_set_image() error
>>> code to avoid the resulting corruption, but that leaves the other bits
>>> of this patch unaddressed, along my "media: imx: smfc: add support
>>> for bayer formats" patch.
>>>
>>> Your driver basically has no support for bayer formats.
>> You added the patches to this driver that adds the bayer support,
>> I don't think there is anything more required of the driver at this
>> point to support bayer, the remaining work needs to happen in the IPUv3
>> driver.
> There is more work, because the way you've merged my changes to
> imx_smfc_setup_channel() into csi_idmac_setup_channel() is wrong with
> respect to the burst size.
>
> You always set it to 8 or 16 depending on the width:
>
> 	burst_size = (image.pix.width & 0xf) ? 8 : 16;
>
> 	ipu_cpmem_set_burstsize(priv->idmac_ch, burst_size);
>
> and then you have my switch() statement which assigns burst_size.
> My _tested_ code removed the above, added the switch, which had
> a default case which reflected the above setting:
>
> 	default:
> 		burst_size = (outfmt->width & 0xf) ? 8 : 16;
>
> and then went on to set the burst size _after_ the switch statement:
>
> 	ipu_cpmem_set_burstsize(priv->smfc_ch, burst_size);
>
> The effect is unchanged for non-bayer formats.  For bayer formats, the
> burst size is determined by the bayer data size.
>
> So, even if it's appropriate to fix ipu_cpmem_set_image(), fixing the
> above is still required.

Oops, sorry missed that. I'll fix.

>
> I'm not convinced that fixing ipu_cpmem_set_image() is even the best
> solution - it's not as trivial as it looks on the surface:
>
>          ipu_cpmem_set_resolution(ch, image->rect.width, image->rect.height);
>          ipu_cpmem_set_stride(ch, pix->bytesperline);
>
> this is fine, it doesn't depend on the format.  However, the next line:
>
>          ipu_cpmem_set_fmt(ch, v4l2_pix_fmt_to_drm_fourcc(pix->pixelformat));
>
> does - v4l2_pix_fmt_to_drm_fourcc() is a locally defined function (it
> isn't v4l2 code) that converts a v4l2 pixel format to a DRM fourcc.
> DRM knows nothing about bayer formats, there aren't fourcc codes in
> DRM for it.

right, yeah that's a problem.

>    The result is that v4l2_pix_fmt_to_drm_fourcc() returns
> -EINVAL cast to a u32, which gets passed unchecked into ipu_cpmem_set_fmt().

Ugh.

>
> ipu_cpmem_set_fmt() won't recognise that, and also returns -EINVAL - and
> it's a bug that this is not checked and propagated.  If it is checked and
> propagated, then we need this to support bayer formats, and I don't see
> DRM people wanting bayer format fourcc codes added without there being
> a real DRM driver wanting to use them.

true.

>
> Then there's the business of calculating the top-left offset of the image,
> which for bayer always needs to be an even number of pixels - as this
> function takes the top-left offset, it ought to respect it, but if it
> doesn't meet this criteria, what should it do?  csi_idmac_setup_channel()
> always sets them to zero, but that's not really something that
> ipu_cpmem_set_image() should assume.

Well, I will integrate your patch above. Thanks for doing this
work for me.

We do need to address the issues you brought up in ipu_cpmem at
some point.

Steve



More information about the linux-arm-kernel mailing list