[PATCH v2 08/22] PCI: dwc: designware: Add EP mode support

Kishon Vijay Abraham I kishon at ti.com
Wed Mar 8 05:31:04 PST 2017


Hi,

On Wednesday 08 March 2017 05:07 PM, Joao Pinto wrote:
> Às 11:35 AM de 3/8/2017, Kishon Vijay Abraham I escreveu:
>> Hi,
>>
>> On Wednesday 08 March 2017 05:02 PM, Joao Pinto wrote:
>>>
>>> Hi Kishon,
>>>
>>>>> Can you provide PCIE_GET_ATU_INB_UNR_REG_OFFSET (similar to
>>>>> PCIE_GET_ATU_OUTB_UNR_REG_OFFSET)?
>>>>
>>>> Yes of course, I will send you the definition soon.
>>>
>>> As promissed here is the definition for Inbound:
>>>
>>> +/* register address builder */
>>> +#define PCIE_GET_ATU_INB_UNR_REG_ADDR(region, register)		\
>>> +					((0x3 << 20) | (region << 9) |	\
>>> +					(0x1 << 8) | (register << 2))
>>
>> Cool, thanks!
> 
> No problem! If you have doubts, please let me know.

Okay, so this looks slightly different than the outbound macro since it takes
the register argument. In the case of outbound PCIE_GET_ATU_OUTB_UNR_REG_OFFSET
returns the offset which was used like
dw_pcie_write_dbi(pci, base, offset + reg, 0x4, val);

How should the value from PCIE_GET_ATU_INB_UNR_REG_ADDR be used?

Thanks
Kishon



More information about the linux-arm-kernel mailing list