[PATCH] arm64: dts: rockchip: remove wrongly added idle states on rk3368

Heiko Stübner heiko at sntech.de
Tue Mar 7 03:06:31 PST 2017


Am Dienstag, 7. März 2017, 15:20:28 CET schrieb Huang, Tao:
> Hi Heiko:
> 
> On 2017年03月02日 06:38, Heiko Stuebner wrote:
> > As reported by Lorenzo, the residency/latency values defined in the
> > idle-state for rk3368 "make no sense". When introducing them I
> > simply took the idle-state node from the vendor kernel in error
> > as I didn't look up if these values were sane in the first place.
> > 
> > Talking to people and determining why they were used in this way
> > showed that it was meant to make sure the cpu_suspend callback
> > got initialized which at the 3.10 time was somehow required even
> > for wfi-based idle handling.
> > 
> > Of course the generic arch_cpu_idle() now does wfi-based idle-handling
> > already, so there is no need for this.
> > 
> > Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> > Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> > ---
> > This has been sitting ere for way to long :-(, but finally I got
> > to finish the change.
> > 
> >  arch/arm64/boot/dts/rockchip/rk3368.dtsi | 20 --------------------
> >  1 file changed, 20 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> > b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 49d1191..5471ace 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> > @@ -107,23 +107,10 @@
> > 
> >  			};
> >  		
> >  		};
> > 
> > -		idle-states {
> > -			entry-method = "psci";
> > -
> > -			cpu_sleep: cpu-sleep-0 {
> > -				compatible = "arm,idle-state";
> > -				arm,psci-suspend-param = <0x1010000>;
> > -				entry-latency-us = <0x3fffffff>;
> > -				exit-latency-us = <0x40000000>;
> > -				min-residency-us = <0xffffffff>;
> > -			};
> > -		};
> > -
> > 
> >  		cpu_l0: cpu at 0 {
> >  		
> >  			device_type = "cpu";
> >  			compatible = "arm,cortex-a53", "arm,armv8";
> >  			reg = <0x0 0x0>;
> > 
> > -			cpu-idle-states = <&cpu_sleep>;
> > 
> >  			enable-method = "psci";
> >  			
> >  			#cooling-cells = <2>; /* min followed by max */
> > 
> > @@ -133,7 +120,6 @@
> > 
> >  			device_type = "cpu";
> >  			compatible = "arm,cortex-a53", "arm,armv8";
> >  			reg = <0x0 0x1>;
> > 
> > -			cpu-idle-states = <&cpu_sleep>;
> > 
> >  			enable-method = "psci";
> >  		
> >  		};
> > 
> > @@ -141,7 +127,6 @@
> > 
> >  			device_type = "cpu";
> >  			compatible = "arm,cortex-a53", "arm,armv8";
> >  			reg = <0x0 0x2>;
> > 
> > -			cpu-idle-states = <&cpu_sleep>;
> > 
> >  			enable-method = "psci";
> >  		
> >  		};
> > 
> > @@ -149,7 +134,6 @@
> > 
> >  			device_type = "cpu";
> >  			compatible = "arm,cortex-a53", "arm,armv8";
> >  			reg = <0x0 0x3>;
> > 
> > -			cpu-idle-states = <&cpu_sleep>;
> > 
> >  			enable-method = "psci";
> >  		
> >  		};
> > 
> > @@ -157,7 +141,6 @@
> > 
> >  			device_type = "cpu";
> >  			compatible = "arm,cortex-a53", "arm,armv8";
> >  			reg = <0x0 0x100>;
> > 
> > -			cpu-idle-states = <&cpu_sleep>;
> > 
> >  			enable-method = "psci";
> >  			
> >  			#cooling-cells = <2>; /* min followed by max */
> > 
> > @@ -167,7 +150,6 @@
> > 
> >  			device_type = "cpu";
> >  			compatible = "arm,cortex-a53", "arm,armv8";
> >  			reg = <0x0 0x101>;
> > 
> > -			cpu-idle-states = <&cpu_sleep>;
> > 
> >  			enable-method = "psci";
> >  		
> >  		};
> > 
> > @@ -175,7 +157,6 @@
> > 
> >  			device_type = "cpu";
> >  			compatible = "arm,cortex-a53", "arm,armv8";
> >  			reg = <0x0 0x102>;
> > 
> > -			cpu-idle-states = <&cpu_sleep>;
> > 
> >  			enable-method = "psci";
> >  		
> >  		};
> > 
> > @@ -183,7 +164,6 @@
> > 
> >  			device_type = "cpu";
> >  			compatible = "arm,cortex-a53", "arm,armv8";
> >  			reg = <0x0 0x103>;
> > 
> > -			cpu-idle-states = <&cpu_sleep>;
> > 
> >  			enable-method = "psci";
> >  		
> >  		};
> >  	
> >  	};
> 
> Looks good to me.
> There are another redundant node - timer at ff810000, which can not probe
> successfully because of missing clocks property. RK3368 don't support
> power down core while idle, so there are not need add broadcast timer.
> Should we delete the timer node or add missing clocks?
> If add clocks, we should fix clk drivers first because timer clk is not
> exported.
> I suggest we should delete the timer node.

Elaine seems to want to add time-specific clock ids - see patches from today 
and I tend to agree with her and simply fixup the timer dts node after that.

Afterall the dt is a hardware description, not a description of what we 
currently like to have in the kernel :-)


Heiko



More information about the linux-arm-kernel mailing list