[GIT PULL 4/5] Freescale arm64 device tree updates for 4.13
Shawn Guo
shawnguo at kernel.org
Sun Jun 18 08:55:22 PDT 2017
The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-4.13
for you to fetch changes up to 375b6755a5b1836699d00c47f689d63bd1e40b95:
arm64: dts: ls1088a: update sata node (2017-06-14 22:42:42 +0800)
----------------------------------------------------------------
The Freescale arm64 device tree updates for 4.13:
- A series from NXP employee Li Yang that updates the copyright claims
to comply with company policy.
- A patch-set from Madalin Bucur that adds Data Path Acceleration
Architecture (DPAA) QBMan and FMan. Quite a few .dtsi files are
created for SoCs with different DPAA configuration to include the
devices as needed.
- Enable UHS-I SD and eMMC support for LS1046A and LS208xA RDB/QDS
boards.
- Enable TMU device for thermal management support on LS1088A.
- Update SATA device node for LS1088A with correct compatible and ECC
register bit.
- A few small random device tree updates.
----------------------------------------------------------------
Javier Martinez Canillas (1):
arm64: dts: ls1043a: Add generic compatible string for I2C EEPROM
Li Yang (1):
arm64: dts: freescale: update the copyright claims
Madalin Bucur (6):
arm64: dts: add DPAA QBMan portals
arm64: dts: add LS1043A DPAA QBMan nodes
arm64: dts: add LS1046A DPAA QBMan nodes
arm64: dts: add DPAA FMan nodes
arm64: dts: add LS1043A DPAA FMan support
arm64: dts: add LS1046A DPAA FMan nodes
Prabhakar Kushwaha (2):
arm64: dts: Define big endian of IFC for LS1043a/LS1046a
arm64: dts: Add flash node for ls1088a qds and rdb
Ran Wang (1):
arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node
Scott Wood (1):
arm64: dts: ls1012a: Add coreclk
Yangbo Lu (5):
mmc: dt: add compatible into eSDHC required properties
arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB
arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS
arm64: dts: ls1012a: add eSDHC nodes
arm64: dts: ls1088a: add esdhc node
Yuantian Tang (4):
arm64: dts: ls1088a: update the sata node
arm64: dts: ls1088a: Add TMU device tree support
dt-bindings: ahci-fsl-qoriq: add ls1088a chip name to the list
arm64: dts: ls1088a: update sata node
yinbo.zhu (1):
arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB
.../devicetree/bindings/ata/ahci-fsl-qoriq.txt | 2 +-
.../devicetree/bindings/mmc/fsl-esdhc.txt | 14 +++
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 10 +-
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 15 ++-
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 39 +++++++-
arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi | 45 +++++++++
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 79 ++++++++++++++-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 69 ++++++++++++-
arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi | 48 +++++++++
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 70 ++++++++++++-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 75 +++++++++++++-
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 28 ++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 20 ++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 111 +++++++++++++++++++--
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 5 +-
.../boot/dts/freescale/qoriq-bman-portals.dtsi | 71 +++++++++++++
.../boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi | 42 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi | 42 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi | 41 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi | 41 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi | 41 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi | 41 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi | 41 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi | 41 ++++++++
arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi | 81 +++++++++++++++
.../boot/dts/freescale/qoriq-qman-portals.dtsi | 80 +++++++++++++++
38 files changed, 1192 insertions(+), 36 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
More information about the linux-arm-kernel
mailing list