[PATCH 1/2] ARM64/irqchip: Update ACPI_IORT symbol selection logic

[Lorenzo Pieralisi]

ACPI IORT is an ACPI addendum to describe the connection topology of
devices with IOMMUs and interrupt controllers on ARM64 ACPI systems.

Currently the ACPI IORT Kbuild symbol is selected whenever the Kbuild
symbol ARM_GIC_V3_ITS is enabled, which in turn is selected by ARM64
Kbuild defaults. This makes the logic behind ACPI_IORT selection a bit
twisted and not easy to follow. On ARM64 systems enabling ACPI the
kbuild symbol ACPI_IORT should always be selected in that it is a kernel
layer provided to the ARM64 arch code to parse and enable ACPI firmware
bindings.

Make the ACPI_IORT selection explicit in ARM64 Kbuild and remove the
selection from ARM_GIC_V3_ITS entry, making the ACPI_IORT selection
logic clearer to follow.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Cc: Will Deacon <will.deacon at arm.com>
Cc: Hanjun Guo <hanjun.guo at linaro.org>
Cc: Catalin Marinas <catalin.marinas at arm.com>
Cc: Marc Zyngier <marc.zyngier at arm.com>
---
 arch/arm64/Kconfig      | 1 +
 drivers/irqchip/Kconfig | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index b2024db..2424fb4 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -3,6 +3,7 @@ config ARM64
 	select ACPI_CCA_REQUIRED if ACPI
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_GTDT if ACPI
+	select ACPI_IORT if ACPI
 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
 	select ACPI_MCFG if ACPI
 	select ACPI_SPCR_TABLE if ACPI
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 478f8ac..4a57b8f 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -39,7 +39,6 @@ config ARM_GIC_V3_ITS
 	bool
 	depends on PCI
 	depends on PCI_MSI
-	select ACPI_IORT if ACPI
 
 config ARM_NVIC
 	bool
-- 
2.10.0