[PATCH v4 5/7] ARM: dts: meson6: switch to new bindings for UART nodes

Jerome Brunet jbrunet at baylibre.com
Mon Jun 12 02:42:57 PDT 2017


On Fri, 2017-06-09 at 11:49 +0200, Neil Armstrong wrote:
> Switch to the stable UART bindings by adding a XTAL node and using the
> proper compatible strings.
> 
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>

Shouldn't this patch be squashed with patch 4 ?


> ---
>  arch/arm/boot/dts/meson6.dtsi | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
> index b0fc91f..a334fbe 100644
> --- a/arch/arm/boot/dts/meson6.dtsi
> +++ b/arch/arm/boot/dts/meson6.dtsi
> @@ -70,9 +70,37 @@
>  		};
>  	};
>  
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +
>  	clk81: clk at 0 {
>  		#clock-cells = <0>;
>  		compatible = "fixed-clock";
>  		clock-frequency = <200000000>;
>  	};
>  }; /* end of / */
> +
> +
> +&uart_AO {
> +	clocks = <&xtal>, <&clk81>, <&clk81>;
> +	clock-names = "xtal", "pclk", "baud";
> +};
> +
> +&uart_A {
> +	clocks = <&xtal>, <&clk81>, <&clk81>;
> +	clock-names = "xtal", "pclk", "baud";
> +};
> +
> +&uart_B {
> +	clocks = <&xtal>, <&clk81>, <&clk81>;
> +	clock-names = "xtal", "pclk", "baud";
> +};
> +
> +&uart_C {
> +	clocks = <&xtal>, <&clk81>, <&clk81>;
> +	clock-names = "xtal", "pclk", "baud";
> +};




More information about the linux-arm-kernel mailing list