[PATCH v8 34/34] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers

Steve Longerbeam slongerbeam at gmail.com
Wed Jun 7 11:34:13 PDT 2017


Enable i.MX v4l2 media staging driver. For video capture on i.MX, the
video multiplexer subdev is required. On the SabreAuto, the ADV7180
video decoder is required along with i2c-mux-gpio. The Sabrelite
and SabreSD require the OV5640 and the SabreLite requires PWM clocks
for the OV5640.

Increase max zoneorder to allow larger video buffer allocations.

Signed-off-by: Steve Longerbeam <steve_longerbeam at mentor.com>
---
 arch/arm/configs/imx_v6_v7_defconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index bb6fa56..63caf25 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -51,6 +51,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CMA=y
+CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
@@ -183,6 +184,7 @@ CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_GPIO=y
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_ALGOPCF=m
@@ -223,14 +225,20 @@ CONFIG_REGULATOR_PFUZE100=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_MUX=y
 CONFIG_SOC_CAMERA=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_CODA=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_OV5640=m
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
@@ -340,6 +348,9 @@ CONFIG_FSL_EDMA=y
 CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
+CONFIG_STAGING_MEDIA=y
+CONFIG_VIDEO_IMX_MEDIA=y
+CONFIG_COMMON_CLK_PWM=y
 CONFIG_IIO=y
 CONFIG_VF610_ADC=y
 CONFIG_MPL3115=y
-- 
2.7.4




More information about the linux-arm-kernel mailing list