[PATCH v2 15/25] KVM: arm64: vgic-v3: Add misc Group-0 handlers

Marc Zyngier marc.zyngier at arm.com
Thu Jun 1 03:21:07 PDT 2017


A number of Group-0 registers can be handled by the same accessors
as that of Group-1, so let's add the required system register encodings
and catch them in the dispatching function.

Reviewed-by: Eric Auger <eric.auger at redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
 arch/arm64/include/asm/sysreg.h | 4 ++++
 virt/kvm/arm/hyp/vgic-v3-sr.c   | 7 +++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index ba93bc7ac8e4..9971c5c435a7 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -180,7 +180,11 @@
 
 #define SYS_VBAR_EL1			sys_reg(3, 0, 12, 0, 0)
 
+#define SYS_ICC_IAR0_EL1		sys_reg(3, 0, 12, 8, 0)
+#define SYS_ICC_EOIR0_EL1		sys_reg(3, 0, 12, 8, 1)
+#define SYS_ICC_HPPIR0_EL1		sys_reg(3, 0, 12, 8, 2)
 #define SYS_ICC_BPR0_EL1		sys_reg(3, 0, 12, 8, 3)
+#define SYS_ICC_AP0Rn_EL1(n)		sys_reg(3, 0, 12, 8, 4 | n)
 #define SYS_ICC_AP1Rn_EL1(n)		sys_reg(3, 0, 12, 9, n)
 #define SYS_ICC_DIR_EL1			sys_reg(3, 0, 12, 11, 1)
 #define SYS_ICC_SGI1R_EL1		sys_reg(3, 0, 12, 11, 5)
diff --git a/virt/kvm/arm/hyp/vgic-v3-sr.c b/virt/kvm/arm/hyp/vgic-v3-sr.c
index b1b9129da045..5ff788d308ee 100644
--- a/virt/kvm/arm/hyp/vgic-v3-sr.c
+++ b/virt/kvm/arm/hyp/vgic-v3-sr.c
@@ -872,9 +872,11 @@ int __hyp_text __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu)
 	is_read = (esr & ESR_ELx_SYS64_ISS_DIR_MASK) == ESR_ELx_SYS64_ISS_DIR_READ;
 
 	switch (sysreg) {
+	case SYS_ICC_IAR0_EL1:
 	case SYS_ICC_IAR1_EL1:
 		fn = __vgic_v3_read_iar;
 		break;
+	case SYS_ICC_EOIR0_EL1:
 	case SYS_ICC_EOIR1_EL1:
 		fn = __vgic_v3_write_eoir;
 		break;
@@ -890,30 +892,35 @@ int __hyp_text __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu)
 		else
 			fn = __vgic_v3_write_bpr1;
 		break;
+	case SYS_ICC_AP0Rn_EL1(0):
 	case SYS_ICC_AP1Rn_EL1(0):
 		if (is_read)
 			fn = __vgic_v3_read_apxr0;
 		else
 			fn = __vgic_v3_write_apxr0;
 		break;
+	case SYS_ICC_AP0Rn_EL1(1):
 	case SYS_ICC_AP1Rn_EL1(1):
 		if (is_read)
 			fn = __vgic_v3_read_apxr1;
 		else
 			fn = __vgic_v3_write_apxr1;
 		break;
+	case SYS_ICC_AP0Rn_EL1(2):
 	case SYS_ICC_AP1Rn_EL1(2):
 		if (is_read)
 			fn = __vgic_v3_read_apxr2;
 		else
 			fn = __vgic_v3_write_apxr2;
 		break;
+	case SYS_ICC_AP0Rn_EL1(3):
 	case SYS_ICC_AP1Rn_EL1(3):
 		if (is_read)
 			fn = __vgic_v3_read_apxr3;
 		else
 			fn = __vgic_v3_write_apxr3;
 		break;
+	case SYS_ICC_HPPIR0_EL1:
 	case SYS_ICC_HPPIR1_EL1:
 		fn = __vgic_v3_read_hppir;
 		break;
-- 
2.11.0




More information about the linux-arm-kernel mailing list