[PATCH v1] clk: rockchip: rk3128: modify rk3128 clk driver to support rk3126

Heiko Stübner heiko at sntech.de
Tue Jul 25 01:07:02 PDT 2017


Hi Elaine,

Am Dienstag, 25. Juli 2017, 15:16:36 CEST schrieb Elaine Zhang:
> rk3128 and rk3126 have some gate registers describe differences.
> So need to make some distinctions.
> 
> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
> ---
>  drivers/clk/rockchip/clk-rk3128.c      | 59
> +++++++++++++++++++++++++++++++--- include/dt-bindings/clock/rk3128-cru.h |
>  3 ++
>  2 files changed, 57 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/clk/rockchip/clk-rk3128.c
> b/drivers/clk/rockchip/clk-rk3128.c index e243f2eae68f..0039b8940900 100644
> --- a/drivers/clk/rockchip/clk-rk3128.c
> +++ b/drivers/clk/rockchip/clk-rk3128.c
> @@ -459,9 +459,8 @@ enum rk3128_plls {
>  			RK2928_CLKSEL_CON(2), 14, 2, MFLAGS, 8, 5, DFLAGS,
>  			RK2928_CLKGATE_CON(10), 15, GFLAGS),
> 
> -	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_sclk_sfc_src_p, 0,
> -			RK2928_CLKSEL_CON(11), 14, 2, MFLAGS, 8, 5, DFLAGS,
> -			RK2928_CLKGATE_CON(3), 15, GFLAGS),
> +	COMPOSITE_NOGATE(0, "sclk_sfc_src", mux_sclk_sfc_src_p, 0,
> +			RK2928_CLKSEL_CON(11), 14, 2, MFLAGS, 8, 5, DFLAGS),
> 
>  	COMPOSITE_NOMUX(PCLK_PMU_PRE, "pclk_pmu_pre", "cpll", 0,
>  			RK2928_CLKSEL_CON(29), 8, 6, DFLAGS,
> @@ -495,7 +494,6 @@ enum rk3128_plls {
>  	GATE(ACLK_DMAC, "aclk_dmac", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1,
> GFLAGS), GATE(0, "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(9), 15, GFLAGS), GATE(0, "aclk_cpu_to_peri",
> "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS),
> -	GATE(HCLK_GPS, "hclk_gps", "aclk_peri", 0, RK2928_CLKGATE_CON(3), 14,
> GFLAGS),
> 
>  	GATE(HCLK_I2S_8CH, "hclk_i2s_8ch", "hclk_peri", 0, RK2928_CLKGATE_CON(7),
> 4, GFLAGS), GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(4), 0, GFLAGS), @@ -541,7 +539,6 @@ enum rk3128_plls {
>  	GATE(0, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5),
> 6, GFLAGS), GATE(HCLK_CRYPTO, "hclk_crypto", "hclk_cpu", 0,
> RK2928_CLKGATE_CON(3), 5, GFLAGS),
> 
> -	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8,
> GFLAGS), GATE(PCLK_ACODEC, "pclk_acodec", "pclk_cpu", 0,
> RK2928_CLKGATE_CON(5), 14, GFLAGS), GATE(0, "pclk_ddrupctl", "pclk_cpu",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 7, GFLAGS), GATE(0, "pclk_grf",
> "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 4, GFLAGS), @@ -574,6
> +571,7 @@ static void __init rk3128_clk_init(struct device_node *np) {
>  	struct rockchip_clk_provider *ctx;
>  	void __iomem *reg_base;
> +	struct clk *clk;
> 
>  	reg_base = of_iomap(np, 0);
>  	if (!reg_base) {
> @@ -593,6 +591,57 @@ static void __init rk3128_clk_init(struct device_node
> *np) RK3128_GRF_SOC_STATUS0);
>  	rockchip_clk_register_branches(ctx, rk3128_clk_branches,
>  				  ARRAY_SIZE(rk3128_clk_branches));
> +
> +	if (of_machine_is_compatible("rockchip,rk3128")) {
> +		clk = clk_register_gate(NULL, "sclk_sfc", "sclk_sfc_src", 0,
> +				ctx->reg_base + RK2928_CLKGATE_CON(3), 15, GFLAGS, &ctx->lock);
> +		if (IS_ERR(clk))
> +			pr_warn("%s: could not register clock sclk_sfc: %ld\n",
> +				__func__, PTR_ERR(clk));
> +		else
> +			rockchip_clk_add_lookup(ctx, clk, SCLK_SFC);
> +

Instead of having this in (hard to read) open code, could you look at how
rk3066/rk3188 does that please?

I.e. have the differences in separate tables (common clocks stay in the same 
table of course) and then use a real rockchip,rk3128-cru / rockchip,rk3126-cru 
clock init to use the correct set of clock tables.


Thanks
Heiko

> +		clk = clk_register_gate(NULL, "hclk_gps", "aclk_peri", 0,
> +				ctx->reg_base + RK2928_CLKGATE_CON(3), 14, GFLAGS, &ctx->lock);
> +		if (IS_ERR(clk))
> +			pr_warn("%s: could not register clock hclk_gps: %ld\n",
> +				__func__, PTR_ERR(clk));
> +		else
> +			rockchip_clk_add_lookup(ctx, clk, HCLK_GPS);
> +
> +		clk = clk_register_gate(NULL, "pclk_hdmi", "pclk_cpu", 0,
> +				ctx->reg_base + RK2928_CLKGATE_CON(3), 8, GFLAGS, &ctx->lock);
> +		if (IS_ERR(clk))
> +			pr_warn("%s: could not register clock pclk_hdmi: %ld\n",
> +				__func__, PTR_ERR(clk));
> +		else
> +			rockchip_clk_add_lookup(ctx, clk, PCLK_HDMI);
> +	} else {
> +		clk = clk_register_gate(NULL, "pclk_stimer", "pclk_cpu",
> CLK_IGNORE_UNUSED, +				ctx->reg_base + RK2928_CLKGATE_CON(3), 15, 
GFLAGS,
> &ctx->lock); +		if (IS_ERR(clk))
> +			pr_warn("%s: could not register clock pclk_stimer: %ld\n",
> +				__func__, PTR_ERR(clk));
> +		else
> +			rockchip_clk_add_lookup(ctx, clk, PCLK_STIMER);
> +
> +		clk = clk_register_gate(NULL, "pclk_s_efuse", "pclk_cpu",
> CLK_IGNORE_UNUSED, +				ctx->reg_base + RK2928_CLKGATE_CON(3), 14, 
GFLAGS,
> &ctx->lock); +		if (IS_ERR(clk))
> +			pr_warn("%s: could not register clock pclk_s_efuse: %ld\n",
> +				__func__, PTR_ERR(clk));
> +		else
> +			rockchip_clk_add_lookup(ctx, clk, PCLK_S_EFUSE);
> +
> +		clk = clk_register_gate(NULL, "pclk_sgrf", "pclk_cpu", 
CLK_IGNORE_UNUSED,
> +				ctx->reg_base + RK2928_CLKGATE_CON(3), 8, GFLAGS, &ctx->lock); +		
if
> (IS_ERR(clk))
> +			pr_warn("%s: could not register clock pclk_sgrf: %ld\n",
> +				__func__, PTR_ERR(clk));
> +		else
> +			rockchip_clk_add_lookup(ctx, clk, PCLK_SGRF);
> +	}
> +
>  	rockchip_clk_protect_critical(rk3128_critical_clocks,
>  				      ARRAY_SIZE(rk3128_critical_clocks));
> 
> diff --git a/include/dt-bindings/clock/rk3128-cru.h
> b/include/dt-bindings/clock/rk3128-cru.h index 92894f4306cf..0451c9c42375
> 100644
> --- a/include/dt-bindings/clock/rk3128-cru.h
> +++ b/include/dt-bindings/clock/rk3128-cru.h
> @@ -125,6 +125,9 @@
>  #define PCLK_GMAC		367
>  #define PCLK_PMU_PRE		368
>  #define PCLK_SIM_CARD		369
> +#define PCLK_STIMER		370
> +#define PCLK_S_EFUSE		371
> +#define PCLK_SGRF		372
> 
>  /* hclk gates */
>  #define HCLK_SPDIF		440





More information about the linux-arm-kernel mailing list