[PATCH v4 0/4] Add Broadcom STB USB phy driver

Al Cooper alcooperx at gmail.com
Fri Jul 21 07:10:22 PDT 2017


Add a new USB Phy driver for Broadcom STB SoCs. This driver
supports Broadcom STB ARM SoCs. This driver in
combination with the Broadcom STB ohci, ehci and xhci
drivers will enable USB1.1, USB2.0 and USB3.0 support.
This Phy driver also supports the Broadcom BDC gadget
driver.

Changes since v3:
- Removed MIPS support because there is such a small
  amount of code that is common to both ARM and MIPS.
  I'll create a separate MIPS driver in the future.
- Have the Kconfig selection for this driver also select
  "CONFIG_SOC_BRCMSTB" which contains needed functions.
- Change device tree properties to use "brcm,has_xhci" and
  "brcm,has_eohci" to determine if the phy contains
  a xhci phy, and e/ohci phy or both.
- Change the phy xlate routine to return an error instead
  of NULL for a requested phy that doesn't exist.
- Moved some probe functionality into it's own funtion to
  simplify the many "if (has_xhci)" statements.

Changes since v2:
- Fix kbuild errors by changing Kconfig so the driver
  only builds for ARCH_BRCMSTB || BMIPS_GENERIC systems

Changes since v1:
- Rebased to next
- Add Kconfig entry to build the driver
- Commented all delays
- Split out sysfs functionality in separate patch
- Removed parsing of old obselete device tree properties
- Changed device property "device" to "dr_mode" using
  standard values "host" and "peripheral" along with new
  values "drd" and "typec-pd"
- Add ability to handle the standard PHY_TYPE_USB2 and
  PHY_TYPE_USB3 arguments passed in by phy consumers.
- Moved phy_provider_register() to end of probe routine

Al Cooper (4):
  soc: brcmstb: Add Product ID and Family ID helper functions
  dt-bindings: Add Broadcom STB USB PHY binding document
  phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver
  phy: usb: phy-brcm-usb: Add ability to force DRD mode to host or
    device

 .../bindings/phy/brcm,brcmstb-usb-phy.txt          |   43 +
 MAINTAINERS                                        |    7 +
 drivers/phy/broadcom/Kconfig                       |   13 +
 drivers/phy/broadcom/Makefile                      |    3 +
 drivers/phy/broadcom/phy-brcm-usb-init.c           | 1034 ++++++++++++++++++++
 drivers/phy/broadcom/phy-brcm-usb-init.h           |   50 +
 drivers/phy/broadcom/phy-brcm-usb.c                |  460 +++++++++
 drivers/soc/bcm/brcmstb/common.c                   |   12 +
 include/linux/soc/brcmstb/brcmstb.h                |   10 +
 9 files changed, 1632 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
 create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init.c
 create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init.h
 create mode 100644 drivers/phy/broadcom/phy-brcm-usb.c

-- 
1.9.0.138.g2de3478




More information about the linux-arm-kernel mailing list