[GIT PULL 1/2] Broadcom devicetree changes for 4.11 (try 2)
Florian Fainelli
f.fainelli at gmail.com
Wed Jan 18 17:25:53 PST 2017
The following changes since commit 7ce7d89f48834cefece7804d38fc5d85382edf77:
Linux 4.10-rc1 (2016-12-25 16:13:08 -0800)
are available in the git repository at:
http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.11/devicetree
for you to fetch changes up to c5a8e3add28ca4063410353acfbe6e650174e432:
Merge tag 'bcm2835-dt-next-2017-01-17' into devicetree/next (2017-01-18 17:20:32 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.11,
please pull the following changes:
- Rafal enables the UART by default on all BCM5301x, BCM4708, BCM4709 since
every device found out there has it enabled by default. He also fixes the
LED definitions for the Luxul XWR-3100 device, enables USB controllers and
their respective PHY devices, specifies the correct GPIO to power on USB
HUBs, adds the additional RAM bank for somes devices, and finally sets the
correct 5Ghz frequency limits on the Netgear R8000
- Jon does a number of Norsthar Plus SoC cleanups, fixes NAND partitions unit
addresses, adds QSPI support to a bunch of boards, adds Ethernet switch ports
to the BCM958625K reference board, enables 3rd Ethernet MAC instance to
relevant DTSes, enables Ethernet on the XMC board, and finally adds SD/MMC
support to the XMC board
- Boris adds the Video Encoder nodes to the Raspberry Pi DTS include files
ands enables it on the relevant boards
- Dan adds support for two new Luxul devices: XAP-1410 and XWR-1200, both
BCM47081 based SoCs
----------------------------------------------------------------
Boris Brezillon (2):
ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi
ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi boards
Dan Haab (2):
ARM: dts: BCM5301X: Add DT for Luxul XAP-1410
ARM: dts: BCM5301X: Add DT for Luxul XWR-1200
Florian Fainelli (1):
Merge tag 'bcm2835-dt-next-2017-01-17' into devicetree/next
Jon Mason (7):
ARM: dts: NSP: DT Clean-ups
ARM: dts: NSP: Correct NAND partition unit address
ARM: dts: NSP: Add QSPI support to missing boards
ARM: dts: NSP: Add BCM958625K switch ports
ARM: dts: NSP: Add and enable amac2
ARM: dts: NSP: Add Ethernet to NSP XMC
ARM: dts: NSP: Add SD/MMC support
Rafał Miłecki (7):
ARM: dts: BCM5301X: Enable UART by default for BCM4708(1), BCM4709(4) & BCM53012
ARM: dts: BCM5301X: Fix LAN LED labels for Luxul XWR-3100
ARM: dts: BCM5301X: Specify USB controllers in DT
ARM: dts: BCM5301X: Set GPIO enabling USB power on Netgear R7000
ARM: dts: BCM5301X: Specify all RAM by including an extra block
ARM: dts: BCM53573: Specify USB ports of on-SoC controllers
ARM: dts: BCM5301X: Set 5 GHz wireless frequency limits on Netgear R8000
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/bcm-nsp.dtsi | 64 +++++----
arch/arm/boot/dts/bcm2835-rpi.dtsi | 5 +
arch/arm/boot/dts/bcm283x.dtsi | 8 ++
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 3 +-
arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 3 +-
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 7 +-
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 -
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 -
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 7 +-
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 +-
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 7 +-
arch/arm/boot/dts/bcm4708.dtsi | 4 +
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 3 +-
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 7 +-
arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 3 +-
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 60 ++++++++
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 +++++++++++++++
arch/arm/boot/dts/bcm47081.dtsi | 4 +
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 3 +-
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 3 +-
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 11 +-
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 51 ++++++-
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 -
arch/arm/boot/dts/bcm4709.dtsi | 1 +
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 7 +-
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 13 +-
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 7 +-
arch/arm/boot/dts/bcm47094.dtsi | 1 +
arch/arm/boot/dts/bcm5301x.dtsi | 41 +++++-
arch/arm/boot/dts/bcm53573.dtsi | 22 +++
arch/arm/boot/dts/bcm94708.dts | 4 -
arch/arm/boot/dts/bcm94709.dts | 4 -
arch/arm/boot/dts/bcm953012er.dts | 4 -
arch/arm/boot/dts/bcm953012k.dts | 1 -
arch/arm/boot/dts/bcm958522er.dts | 35 ++++-
arch/arm/boot/dts/bcm958525er.dts | 35 ++++-
arch/arm/boot/dts/bcm958525xmc.dts | 68 ++++++++--
arch/arm/boot/dts/bcm958622hr.dts | 42 ++++++
arch/arm/boot/dts/bcm958623hr.dts | 58 ++++++--
arch/arm/boot/dts/bcm958625hr.dts | 72 ++++++++--
arch/arm/boot/dts/bcm958625k.dts | 151 ++++++++++++++++-----
arch/arm/boot/dts/bcm988312hr.dts | 42 ++++++
43 files changed, 813 insertions(+), 172 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
More information about the linux-arm-kernel
mailing list