[PATCH v2] usb: musb: sunxi: Uses the resource-managed extcon API when registering extcon notifier

[Bin Liu]

On Tue, Jan 10, 2017 at 05:20:38PM +0900, Chanwoo Choi wrote:
> Hi Felipe,
> 
> This patch got the acked-by from Bin Liu and.
> Could you please apply this patch?

I have picked this one.

Regards,
-Bin.

> 
> On 2016년 12월 30일 13:19, Chanwoo Choi wrote:
> > This patch just uses the resource-managed extcon API when registering
> > the extcon notifier.
> > 
> > Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
> > Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> > Acked-by: Bin Liu <b-liu at ti.com>
> > ---
> > Changes from v1:
> > - Rebase this patch based on v4.10-rc1.
> > - Add acked-by tag from Maxime Ripard and Bin Lin.
> > - Drop the phy/power-supply/chipidea patches.
> > 
> >  drivers/usb/musb/sunxi.c | 12 +++---------
> >  1 file changed, 3 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
> > index d0be0eadd0d9..2332294dee0f 100644
> > --- a/drivers/usb/musb/sunxi.c
> > +++ b/drivers/usb/musb/sunxi.c
> > @@ -251,14 +251,14 @@ static int sunxi_musb_init(struct musb *musb)
> >  	writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0);
> >  
> >  	/* Register notifier before calling phy_init() */
> > -	ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST,
> > -				       &glue->host_nb);
> > +	ret = devm_extcon_register_notifier(glue->dev, glue->extcon,
> > +					EXTCON_USB_HOST, &glue->host_nb);
> >  	if (ret)
> >  		goto error_reset_assert;
> >  
> >  	ret = phy_init(glue->phy);
> >  	if (ret)
> > -		goto error_unregister_notifier;
> > +		goto error_reset_assert;
> >  
> >  	musb->isr = sunxi_musb_interrupt;
> >  
> > @@ -267,9 +267,6 @@ static int sunxi_musb_init(struct musb *musb)
> >  
> >  	return 0;
> >  
> > -error_unregister_notifier:
> > -	extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
> > -				   &glue->host_nb);
> >  error_reset_assert:
> >  	if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
> >  		reset_control_assert(glue->rst);
> > @@ -293,9 +290,6 @@ static int sunxi_musb_exit(struct musb *musb)
> >  
> >  	phy_exit(glue->phy);
> >  
> > -	extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
> > -				   &glue->host_nb);
> > -
> >  	if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags))
> >  		reset_control_assert(glue->rst);
> >  
> > 
> 
> 
> -- 
> Best Regards,
> Chanwoo Choi
> S/W Center, Samsung Electronics