[PATCH v5 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other
Krzysztof Kozlowski
krzk at kernel.org
Fri Jan 6 05:49:29 PST 2017
On Fri, Jan 06, 2017 at 10:43:47PM +0900, Andi Shyti wrote:
> Currently tm2e dts includes tm2 but there are some differences
> between the two boards and tm2 has some properties that tm2e
> doesn't have.
>
> That's why it's important to keep the two dts files independent
> and put all the commonalities in a tm2-common.dtsi file.
>
> At the current status the only two differences between the two
> dts files (besides the board name) are ldo31 and ldo38.
>
> Signed-off-by: Andi Shyti <andi.shyti at samsung.com>
> Reviewed-by: Javier Martinez Canillas <javier at osg.samsung.com>
> ---
> ...ynos5433-tm2.dts => exynos5433-tm2-common.dtsi} | 21 +-
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1150 +-------------------
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
> 3 files changed, 42 insertions(+), 1131 deletions(-)
> copy arch/arm64/boot/dts/exynos/{exynos5433-tm2.dts => exynos5433-tm2-common.dtsi} (98%)
> rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> similarity index 98%
> copy from arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> copy to arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> index 640e4b9910ae..cc6701b3bce4 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> @@ -3,8 +3,8 @@
> *
> * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> *
> - * Device tree source file for Samsung's TM2 board which is based on
> - * Samsung Exynos5433 SoC.
> + * Common device tree source file for Samsung's TM2 and TM2E boards
> + * which are based on Samsung Exynos5433 SoC.
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> @@ -19,9 +19,6 @@
> #include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> - model = "Samsung TM2 board";
> - compatible = "samsung,tm2", "samsung,exynos5433";
> -
> aliases {
> gsc0 = &gsc_0;
> gsc1 = &gsc_1;
> @@ -552,9 +549,10 @@
> };
>
> ldo31_reg: LDO31 {
> - regulator-name = "TSP_VDD_1.85V_AP";
> - regulator-min-microvolt = <1850000>;
> - regulator-max-microvolt = <1850000>;
> + /*
> + * LDO31 differs from target to target,
> + * its definition is in the .dts
> + */
> };
>
> ldo32_reg: LDO32 {
> @@ -595,9 +593,10 @@
> };
>
> ldo38_reg: LDO38 {
> - regulator-name = "VCC_3.0V_MOTOR_AP";
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> + /*
> + * LDO38 differs from target to target,
> + * its definition is in the .dts
> + */
> };
>
> ldo39_reg: LDO39 {
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> dissimilarity index 98%
> index 640e4b9910ae..2449266b268f 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -1,1119 +1,31 @@
> -/*
> - * SAMSUNG Exynos5433 TM2 board device tree source
> - *
> - * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> - *
> - * Device tree source file for Samsung's TM2 board which is based on
> - * Samsung Exynos5433 SoC.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -
> -/dts-v1/;
> -#include "exynos5433.dtsi"
> -#include <dt-bindings/clock/samsung,s2mps11.h>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include <dt-bindings/interrupt-controller/irq.h>
> -
> -/ {
> - model = "Samsung TM2 board";
> - compatible = "samsung,tm2", "samsung,exynos5433";
> -
> - aliases {
> - gsc0 = &gsc_0;
> - gsc1 = &gsc_1;
> - gsc2 = &gsc_2;
> - pinctrl0 = &pinctrl_alive;
> - pinctrl1 = &pinctrl_aud;
> - pinctrl2 = &pinctrl_cpif;
> - pinctrl3 = &pinctrl_ese;
> - pinctrl4 = &pinctrl_finger;
> - pinctrl5 = &pinctrl_fsys;
> - pinctrl6 = &pinctrl_imem;
> - pinctrl7 = &pinctrl_nfc;
> - pinctrl8 = &pinctrl_peric;
> - pinctrl9 = &pinctrl_touch;
> - serial0 = &serial_0;
> - serial1 = &serial_1;
> - serial2 = &serial_2;
> - serial3 = &serial_3;
> - spi0 = &spi_0;
> - spi1 = &spi_1;
> - spi2 = &spi_2;
> - spi3 = &spi_3;
> - spi4 = &spi_4;
> - mshc0 = &mshc_0;
> - mshc2 = &mshc_2;
> - };
> -
> - chosen {
> - stdout-path = &serial_1;
> - };
> -
> - memory at 20000000 {
> - device_type = "memory";
> - reg = <0x0 0x20000000 0x0 0xc0000000>;
> - };
> -
> - gpio-keys {
> - compatible = "gpio-keys";
> -
> - power-key {
> - gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
> - linux,code = <KEY_POWER>;
> - label = "power key";
> - debounce-interval = <10>;
> - };
> -
> - volume-up-key {
> - gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
> - linux,code = <KEY_VOLUMEUP>;
> - label = "volume-up key";
> - debounce-interval = <10>;
> - };
> -
> - volume-down-key {
> - gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
> - linux,code = <KEY_VOLUMEDOWN>;
> - label = "volume-down key";
> - debounce-interval = <10>;
> - };
> -
> - homepage-key {
> - gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
> - linux,code = <KEY_MENU>;
> - label = "homepage key";
> - debounce-interval = <10>;
> - };
> - };
> -
> - i2c_max98504: i2c-gpio-0 {
> - compatible = "i2c-gpio";
> - gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
> - &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
> - i2c-gpio,delay-us = <2>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "okay";
> -
> - max98504: max98504 at 31 {
> - compatible = "maxim,max98504";
> - reg = <0x31>;
> - maxim,rx-path = <1>;
> - maxim,tx-path = <1>;
> - maxim,tx-channel-mask = <3>;
> - maxim,tx-channel-source = <2>;
> - };
> - };
> -
> - sound {
> - compatible = "samsung,tm2-audio";
> - audio-codec = <&wm5110>;
> - i2s-controller = <&i2s0>;
> - audio-amplifier = <&max98504>;
> - mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
> - model = "wm5110";
> - samsung,audio-routing =
> - /* Headphone */
> - "HP", "HPOUT1L",
> - "HP", "HPOUT1R",
> -
> - /* Speaker */
> - "SPK", "SPKOUT",
> - "SPKOUT", "HPOUT2L",
> - "SPKOUT", "HPOUT2R",
> -
> - /* Receiver */
> - "RCV", "HPOUT3L",
> - "RCV", "HPOUT3R";
> - status = "okay";
> - };
> -};
> -
> -&adc {
> - vdd-supply = <&ldo3_reg>;
> - status = "okay";
> -
> - thermistor-ap {
> - compatible = "murata,ncp03wf104";
> - pullup-uv = <1800000>;
> - pullup-ohm = <100000>;
> - pulldown-ohm = <0>;
> - io-channels = <&adc 0>;
> - };
> -
> - thermistor-battery {
> - compatible = "murata,ncp03wf104";
> - pullup-uv = <1800000>;
> - pullup-ohm = <100000>;
> - pulldown-ohm = <0>;
> - io-channels = <&adc 1>;
> - #thermal-sensor-cells = <0>;
> - };
> -
> - thermistor-charger {
> - compatible = "murata,ncp03wf104";
> - pullup-uv = <1800000>;
> - pullup-ohm = <100000>;
> - pulldown-ohm = <0>;
> - io-channels = <&adc 2>;
> - };
> -};
> -
> -&bus_g2d_400 {
> - devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
> - vdd-supply = <&buck4_reg>;
> - exynos,saturation-ratio = <10>;
> - status = "okay";
> -};
> -
> -&bus_g2d_266 {
> - devfreq = <&bus_g2d_400>;
> - status = "okay";
> -};
> -
> -&bus_gscl {
> - devfreq = <&bus_g2d_400>;
> - status = "okay";
> -};
> -
> -&bus_hevc {
> - devfreq = <&bus_g2d_400>;
> - status = "okay";
> -};
> -
> -&bus_jpeg {
> - devfreq = <&bus_g2d_400>;
> - status = "okay";
> -};
> -
> -&bus_mfc {
> - devfreq = <&bus_g2d_400>;
> - status = "okay";
> -};
> -
> -&bus_mscl {
> - devfreq = <&bus_g2d_400>;
> - status = "okay";
> -};
> -
> -&bus_noc0 {
> - devfreq = <&bus_g2d_400>;
> - status = "okay";
> -};
> -
> -&bus_noc1 {
> - devfreq = <&bus_g2d_400>;
> - status = "okay";
> -};
> -
> -&bus_noc2 {
> - devfreq = <&bus_g2d_400>;
> - status = "okay";
> -};
> -
> -&cmu_aud {
> - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
> - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
> -};
> -
> -&cmu_fsys {
> - assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
> - <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
> - <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
> - <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
> - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
> - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
> - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
> - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
> - <&cmu_top CLK_DIV_SCLK_USBDRD30>,
> - <&cmu_top CLK_DIV_SCLK_USBHOST30>;
> - assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
> - <&cmu_top CLK_MOUT_BUS_PLL_USER>,
> - <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
> - <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
> - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
> - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
> - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
> - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
> - assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
> - <66700000>, <66700000>;
> -};
> -
> -&cmu_gscl {
> - assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
> - <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
> - assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
> - <&cmu_top CLK_ACLK_GSCL_333>;
> -};
> -
> -&cmu_mfc {
> - assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
> - assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
> -};
> -
> -&cmu_mscl {
> - assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
> - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
> - <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
> - <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
> - assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
> - <&cmu_top CLK_SCLK_JPEG_MSCL>,
> - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
> - <&cmu_top CLK_MOUT_BUS_PLL_USER>;
> -};
> -
> -&cpu0 {
> - cpu-supply = <&buck3_reg>;
> -};
> -
> -&cpu4 {
> - cpu-supply = <&buck2_reg>;
> -};
> -
> -&decon {
> - status = "okay";
> -
> - i80-if-timings {
> - };
> -};
> -
> -&dsi {
> - status = "okay";
> - vddcore-supply = <&ldo6_reg>;
> - vddio-supply = <&ldo7_reg>;
> - samsung,pll-clock-frequency = <24000000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&te_irq>;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port at 1 {
> - reg = <1>;
> -
> - dsi_out: endpoint {
> - samsung,burst-clock-frequency = <512000000>;
> - samsung,esc-clock-frequency = <16000000>;
> - };
> - };
> - };
> -};
> -
> -&hsi2c_0 {
> - status = "okay";
> - clock-frequency = <2500000>;
> -
> - s2mps13-pmic at 66 {
> - compatible = "samsung,s2mps13-pmic";
> - interrupt-parent = <&gpa0>;
> - interrupts = <7 IRQ_TYPE_NONE>;
> - reg = <0x66>;
> - samsung,s2mps11-wrstbi-ground;
> -
> - s2mps13_osc: clocks {
> - compatible = "samsung,s2mps13-clk";
> - #clock-cells = <1>;
> - clock-output-names = "s2mps13_ap", "s2mps13_cp",
> - "s2mps13_bt";
> - };
> -
> - regulators {
> - ldo1_reg: LDO1 {
> - regulator-name = "VDD_ALIVE_0.9V_AP";
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <900000>;
> - regulator-always-on;
> - };
> -
> - ldo2_reg: LDO2 {
> - regulator-name = "VDDQ_MMC2_2.8V_AP";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo3_reg: LDO3 {
> - regulator-name = "VDD1_E_1.8V_AP";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo4_reg: LDO4 {
> - regulator-name = "VDD10_MIF_PLL_1.0V_AP";
> - regulator-min-microvolt = <1300000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo5_reg: LDO5 {
> - regulator-name = "VDD10_DPLL_1.0V_AP";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo6_reg: LDO6 {
> - regulator-name = "VDD10_MIPI2L_1.0V_AP";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo7_reg: LDO7 {
> - regulator-name = "VDD18_MIPI2L_1.8V_AP";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - ldo8_reg: LDO8 {
> - regulator-name = "VDD18_LLI_1.8V_AP";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo9_reg: LDO9 {
> - regulator-name = "VDD18_ABB_ETC_1.8V_AP";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo10_reg: LDO10 {
> - regulator-name = "VDD33_USB30_3.0V_AP";
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo11_reg: LDO11 {
> - regulator-name = "VDD_INT_M_1.0V_AP";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo12_reg: LDO12 {
> - regulator-name = "VDD_KFC_M_1.1V_AP";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - };
> -
> - ldo13_reg: LDO13 {
> - regulator-name = "VDD_G3D_M_0.95V_AP";
> - regulator-min-microvolt = <950000>;
> - regulator-max-microvolt = <950000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo14_reg: LDO14 {
> - regulator-name = "VDDQ_M1_LDO_1.2V_AP";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo15_reg: LDO15 {
> - regulator-name = "VDDQ_M2_LDO_1.2V_AP";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - ldo16_reg: LDO16 {
> - regulator-name = "VDDQ_EFUSE";
> - regulator-min-microvolt = <1400000>;
> - regulator-max-microvolt = <3400000>;
> - regulator-always-on;
> - };
> -
> - ldo17_reg: LDO17 {
> - regulator-name = "V_TFLASH_2.8V_AP";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - };
> -
> - ldo18_reg: LDO18 {
> - regulator-name = "V_CODEC_1.8V_AP";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - ldo19_reg: LDO19 {
> - regulator-name = "VDDA_1.8V_COMP";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo20_reg: LDO20 {
> - regulator-name = "VCC_2.8V_AP";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - regulator-always-on;
> - };
> -
> - ldo21_reg: LDO21 {
> - regulator-name = "VT_CAM_1.8V";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - ldo22_reg: LDO22 {
> - regulator-name = "CAM_IO_1.8V_AP";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - ldo23_reg: LDO23 {
> - regulator-name = "CAM_SEN_CORE_1.05V_AP";
> - regulator-min-microvolt = <1050000>;
> - regulator-max-microvolt = <1050000>;
> - };
> -
> - ldo24_reg: LDO24 {
> - regulator-name = "VT_CAM_1.2V";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - };
> -
> - ldo25_reg: LDO25 {
> - regulator-name = "UNUSED_LDO25";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - };
> -
> - ldo26_reg: LDO26 {
> - regulator-name = "CAM_AF_2.8V_AP";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - };
> -
> - ldo27_reg: LDO27 {
> - regulator-name = "VCC_3.0V_LCD_AP";
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - };
> -
> - ldo28_reg: LDO28 {
> - regulator-name = "VCC_1.8V_LCD_AP";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - ldo29_reg: LDO29 {
> - regulator-name = "VT_CAM_2.8V";
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - };
> -
> - ldo30_reg: LDO30 {
> - regulator-name = "TSP_AVDD_3.3V_AP";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - ldo31_reg: LDO31 {
> - regulator-name = "TSP_VDD_1.85V_AP";
> - regulator-min-microvolt = <1850000>;
> - regulator-max-microvolt = <1850000>;
> - };
> -
> - ldo32_reg: LDO32 {
> - regulator-name = "VTOUCH_1.8V_AP";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - ldo33_reg: LDO33 {
> - regulator-name = "VTOUCH_LED_3.3V";
> - regulator-min-microvolt = <2500000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-ramp-delay = <12500>;
> - };
> -
> - ldo34_reg: LDO34 {
> - regulator-name = "VCC_1.8V_MHL_AP";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <2100000>;
> - };
> -
> - ldo35_reg: LDO35 {
> - regulator-name = "OIS_VM_2.8V";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <2800000>;
> - };
> -
> - ldo36_reg: LDO36 {
> - regulator-name = "VSIL_1.0V";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - };
> -
> - ldo37_reg: LDO37 {
> - regulator-name = "VF_1.8V";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - ldo38_reg: LDO38 {
> - regulator-name = "VCC_3.0V_MOTOR_AP";
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - };
> -
> - ldo39_reg: LDO39 {
> - regulator-name = "V_HRM_1.8V";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - ldo40_reg: LDO40 {
> - regulator-name = "V_HRM_3.3V";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - buck1_reg: BUCK1 {
> - regulator-name = "VDD_MIF_0.9V_AP";
> - regulator-min-microvolt = <600000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - buck2_reg: BUCK2 {
> - regulator-name = "VDD_EGL_1.0V_AP";
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - buck3_reg: BUCK3 {
> - regulator-name = "VDD_KFC_1.0V_AP";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - buck4_reg: BUCK4 {
> - regulator-name = "VDD_INT_0.95V_AP";
> - regulator-min-microvolt = <600000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - buck5_reg: BUCK5 {
> - regulator-name = "VDD_DISP_CAM0_0.9V_AP";
> - regulator-min-microvolt = <600000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - buck6_reg: BUCK6 {
> - regulator-name = "VDD_G3D_0.9V_AP";
> - regulator-min-microvolt = <600000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-always-on;
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - buck7_reg: BUCK7 {
> - regulator-name = "VDD_MEM1_1.2V_AP";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-always-on;
> - };
> -
> - buck8_reg: BUCK8 {
> - regulator-name = "VDD_LLDO_1.35V_AP";
> - regulator-min-microvolt = <1350000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - buck9_reg: BUCK9 {
> - regulator-name = "VDD_MLDO_2.0V_AP";
> - regulator-min-microvolt = <1350000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - };
> -
> - buck10_reg: BUCK10 {
> - regulator-name = "vdd_mem2";
> - regulator-min-microvolt = <550000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-always-on;
> - };
> - };
> - };
> -};
> -
> -&hsi2c_8 {
> - status = "okay";
> -
> - max77843 at 66 {
> - compatible = "maxim,max77843";
> - interrupt-parent = <&gpa1>;
> - interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> - reg = <0x66>;
> -
> - muic: max77843-muic {
> - compatible = "maxim,max77843-muic";
> - };
> -
> - regulators {
> - compatible = "maxim,max77843-regulator";
> - safeout1_reg: SAFEOUT1 {
> - regulator-name = "SAFEOUT1";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <4950000>;
> - };
> -
> - safeout2_reg: SAFEOUT2 {
> - regulator-name = "SAFEOUT2";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <4950000>;
> - };
> -
> - charger_reg: CHARGER {
> - regulator-name = "CHARGER";
> - regulator-min-microamp = <100000>;
> - regulator-max-microamp = <3150000>;
> - };
> - };
> -
> - haptic: max77843-haptic {
> - compatible = "maxim,max77843-haptic";
> - haptic-supply = <&ldo38_reg>;
> - pwms = <&pwm 0 33670 0>;
> - pwm-names = "haptic";
> - };
> - };
> -};
> -
> -&i2s0 {
> - status = "okay";
> -};
> -
> -&mshc_0 {
> - status = "okay";
> - num-slots = <1>;
> - mmc-hs200-1_8v;
> - mmc-hs400-1_8v;
> - cap-mmc-highspeed;
> - non-removable;
> - card-detect-delay = <200>;
> - samsung,dw-mshc-ciu-div = <3>;
> - samsung,dw-mshc-sdr-timing = <0 4>;
> - samsung,dw-mshc-ddr-timing = <0 2>;
> - samsung,dw-mshc-hs400-timing = <0 3>;
> - samsung,read-strobe-delay = <90>;
> - fifo-depth = <0x80>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
> - &sd0_bus8 &sd0_rdqs>;
> - bus-width = <8>;
> - assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
> - assigned-clock-rates = <800000000>;
> -};
> -
> -&mshc_2 {
> - status = "okay";
> - num-slots = <1>;
> - cap-sd-highspeed;
> - disable-wp;
> - cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
> - cd-inverted;
> - card-detect-delay = <200>;
> - samsung,dw-mshc-ciu-div = <3>;
> - samsung,dw-mshc-sdr-timing = <0 4>;
> - samsung,dw-mshc-ddr-timing = <0 2>;
> - fifo-depth = <0x80>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
> - bus-width = <4>;
> -};
> -
> -&ppmu_d0_general {
> - status = "okay";
> - events {
> - ppmu_event0_d0_general: ppmu-event0-d0-general {
> - event-name = "ppmu-event0-d0-general";
> - };
> - };
> -};
> -
> -&ppmu_d1_general {
> - status = "okay";
> - events {
> - ppmu_event0_d1_general: ppmu-event0-d1-general {
> - event-name = "ppmu-event0-d1-general";
> - };
> - };
> -};
> -
> -&pinctrl_alive {
> - pinctrl-names = "default";
> - pinctrl-0 = <&initial_alive>;
> -
> - initial_alive: initial-state {
> - PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpa0-1, NONE, FAST_SR1);
> - PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
> - PIN(INPUT, gpa0-3, NONE, FAST_SR1);
> - PIN(INPUT, gpa0-4, NONE, FAST_SR1);
> - PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
> - PIN(INPUT, gpa0-6, NONE, FAST_SR1);
> - PIN(INPUT, gpa0-7, NONE, FAST_SR1);
> -
> - PIN(INPUT, gpa1-0, UP, FAST_SR1);
> - PIN(INPUT, gpa1-1, NONE, FAST_SR1);
> - PIN(INPUT, gpa1-2, NONE, FAST_SR1);
> - PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
> - PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
> - PIN(INPUT, gpa1-5, NONE, FAST_SR1);
> - PIN(INPUT, gpa1-6, NONE, FAST_SR1);
> - PIN(INPUT, gpa1-7, NONE, FAST_SR1);
> -
> - PIN(INPUT, gpa2-0, NONE, FAST_SR1);
> - PIN(INPUT, gpa2-1, NONE, FAST_SR1);
> - PIN(INPUT, gpa2-2, NONE, FAST_SR1);
> - PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
> - PIN(INPUT, gpa2-4, NONE, FAST_SR1);
> - PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
> - PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
> - PIN(INPUT, gpa2-7, NONE, FAST_SR1);
> -
> - PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpa3-2, NONE, FAST_SR1);
> - PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
> - PIN(INPUT, gpa3-4, NONE, FAST_SR1);
> - PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
> - PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
> - PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpf1-0, NONE, FAST_SR1);
> - PIN(INPUT, gpf1-1, NONE, FAST_SR1);
> - PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
> - PIN(INPUT, gpf1-4, UP, FAST_SR1);
> - PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
> - PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
> - PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
> - PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpf3-2, NONE, FAST_SR1);
> - PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
> - PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
> - PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
> - PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
> - PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
> - PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
> - PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
> - PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
> - PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
> - PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
> - PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
> - };
> -
> - te_irq: te_irq {
> - samsung,pins = "gpf1-3";
> - samsung,pin-function = <0xf>;
> - };
> -};
> -
> -&pinctrl_cpif {
> - pinctrl-names = "default";
> - pinctrl-0 = <&initial_cpif>;
> -
> - initial_cpif: initial-state {
> - PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
> - };
> -};
> -
> -&pinctrl_ese {
> - pinctrl-names = "default";
> - pinctrl-0 = <&initial_ese>;
> -
> - initial_ese: initial-state {
> - PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
> - };
> -};
> -
> -&pinctrl_fsys {
> - pinctrl-names = "default";
> - pinctrl-0 = <&initial_fsys>;
> -
> - initial_fsys: initial-state {
> - PIN(INPUT, gpr3-0, NONE, FAST_SR1);
> - PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
> - PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
> - PIN(INPUT, gpr3-7, NONE, FAST_SR1);
> - };
> -};
> -
> -&pinctrl_imem {
> - pinctrl-names = "default";
> - pinctrl-0 = <&initial_imem>;
> -
> - initial_imem: initial-state {
> - PIN(INPUT, gpf0-0, UP, FAST_SR1);
> - PIN(INPUT, gpf0-1, UP, FAST_SR1);
> - PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
> - PIN(INPUT, gpf0-3, UP, FAST_SR1);
> - PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
> - PIN(INPUT, gpf0-5, NONE, FAST_SR1);
> - PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
> - PIN(INPUT, gpf0-7, UP, FAST_SR1);
> - };
> -};
> -
> -&pinctrl_nfc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&initial_nfc>;
> -
> - initial_nfc: initial-state {
> - PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
> - };
> -};
> -
> -&pinctrl_peric {
> - pinctrl-names = "default";
> - pinctrl-0 = <&initial_peric>;
> -
> - initial_peric: initial-state {
> - PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpv7-2, NONE, FAST_SR1);
> - PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
> - PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
> - PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
> - PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
> - PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpc3-4, NONE, FAST_SR1);
> - PIN(INPUT, gpc3-5, NONE, FAST_SR1);
> - PIN(INPUT, gpc3-6, NONE, FAST_SR1);
> - PIN(INPUT, gpc3-7, NONE, FAST_SR1);
> -
> - PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
> - PIN(2, gpg0-1, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpd4-0, NONE, FAST_SR1);
> - PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
> - PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
> - PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpd8-1, UP, FAST_SR1);
> -
> - PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
> - PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
> - PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
> -
> - PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
> - PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
> - PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
> - PIN(INPUT, gpg3-7, DOWN, FAST_SR1);
> - };
> -};
> -
> -&pinctrl_touch {
> - pinctrl-names = "default";
> - pinctrl-0 = <&initial_touch>;
> -
> - initial_touch: initial-state {
> - PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
> - };
> -};
> -
> -&pwm {
> - pinctrl-0 = <&pwm0_out>;
> - pinctrl-names = "default";
> - status = "okay";
> -};
> -
> -&mic {
> - status = "okay";
> -
> - i80-if-timings {
> - };
> -};
> -
> -&pmu_system_controller {
> - assigned-clocks = <&pmu_system_controller 0>;
> - assigned-clock-parents = <&xxti>;
> -};
> -
> -&serial_1 {
> - status = "okay";
> -};
> -
> -&spi_1 {
> - cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
> - status = "okay";
> -
> - wm5110: wm5110-codec at 0 {
> - compatible = "wlf,wm5110";
> - reg = <0x0>;
> - spi-max-frequency = <20000000>;
> - interrupt-parent = <&gpa0>;
> - interrupts = <4 IRQ_TYPE_NONE>;
> - clocks = <&pmu_system_controller 0>,
> - <&s2mps13_osc S2MPS11_CLK_BT>;
> - clock-names = "mclk1", "mclk2";
> -
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - wlf,micd-detect-debounce = <300>;
> - wlf,micd-bias-start-time = <0x1>;
> - wlf,micd-rate = <0x7>;
> - wlf,micd-dbtime = <0x1>;
> - wlf,micd-force-micbias;
> - wlf,micd-configs = <0x0 1 0>;
> - wlf,hpdet-channel = <1>;
> - wlf,gpsw = <0x1>;
> - wlf,inmode = <2 0 2 0>;
> -
> - wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
> - wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
> -
> - /* core supplies */
> - AVDD-supply = <&ldo18_reg>;
> - DBVDD1-supply = <&ldo18_reg>;
> - CPVDD-supply = <&ldo18_reg>;
> - DBVDD2-supply = <&ldo18_reg>;
> - DBVDD3-supply = <&ldo18_reg>;
> -
> - controller-data {
> - samsung,spi-feedback-delay = <0>;
> - };
> - };
> -};
> -
> -&timer {
> - clock-frequency = <24000000>;
> -};
> -
> -&tmu_atlas0 {
> - vtmu-supply = <&ldo3_reg>;
> - status = "okay";
> -};
> -
> -&tmu_apollo {
> - vtmu-supply = <&ldo3_reg>;
> - status = "okay";
> -};
> -
> -&tmu_g3d {
> - vtmu-supply = <&ldo3_reg>;
> - status = "okay";
> -};
> -
> -&usbdrd30 {
> - vdd33-supply = <&ldo10_reg>;
> - vdd10-supply = <&ldo6_reg>;
> - status = "okay";
> -};
> -
> -&usbdrd_dwc3_0 {
> - dr_mode = "otg";
> -};
> -
> -&usbdrd30_phy {
> - vbus-supply = <&safeout1_reg>;
> - status = "okay";
> -};
> -
> -&xxti {
> - clock-frequency = <24000000>;
> -};
> +/*
> + * SAMSUNG Exynos5433 TM2 board device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *
> + * Device tree source file for Samsung's TM2 board which is based on
> + * Samsung Exynos5433 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "exynos5433-tm2-common.dtsi"
> +
> +/ {
> + model = "Samsung TM2 board";
> + compatible = "samsung,tm2", "samsung,exynos5433";
> +};
> +
> +&ldo31_reg {
> + regulator-name = "TSP_VDD_1.85V_AP";
> + regulator-min-microvolt = <1850000>;
> + regulator-max-microvolt = <1850000>;
> +};
> +
> +&ldo38_reg {
> + regulator-name = "VCC_3.0V_MOTOR_AP";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> index 854c583092d5..2fbf3a860316 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
> @@ -11,7 +11,7 @@
> * published by the Free Software Foundation.
> */
>
> -#include "exynos5433-tm2.dts"
> +#include "exynos5433-tm2-common.dtsi"
>
> / {
> model = "Samsung TM2E board";
Where are the regulators?
Beside that it is starting to look good. I didn't find anything else but
maybe Javier's eagle eye will catch something.
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list