[PATCH 1/2] ARM: dts: da850: Add usb device node

[David Lechner]

Hi Sekhar,

On 11/21/2016 10:59 AM, Axel Haslam wrote:
> Add the usb1 device node for the da850 soc.
> This will allow boards to use the usb1 port
> when booting through DT.
>
> Signed-off-by: Axel Haslam <ahaslam at baylibre.com>
> ---
>  arch/arm/boot/dts/da850.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 1bb1f6d..fbd50d6 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -406,6 +406,14 @@
>  					>;
>  			status = "disabled";
>  		};
> +		usb1: usb at 225000 {
> +			compatible = "ti,da830-ohci";
> +			reg = <0x225000 0x1000>;
> +			interrupts = <59>;
> +			phys = <&usb_phy 1>;
> +			phy-names = "usb-phy";
> +			status = "disabled";
> +		};
>  		gpio: gpio at 226000 {
>  			compatible = "ti,dm6441-gpio";
>  			gpio-controller;
>


This patch can be pickup up now. I have just tested with next-20171015 + 
linux-davinci/master.