[PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA9500

[Rafał Miłecki]

On 23 February 2017 at 13:59, Imre Kaloz <kaloz at openwrt.org> wrote:
> On 2017-02-23 13:51, Rafał Miłecki wrote:
>>
>> On 23 February 2017 at 13:44, Imre Kaloz <kaloz at openwrt.org> wrote:
>>>
>>> On 2017-02-23 13:29, Rafał Miłecki wrote:
>>>>
>>>> On 23 February 2017 at 13:27, Imre Kaloz <kaloz at openwrt.org> wrote:
>>>>>
>>>>> As discussed for other platforms as well, please use the board's name
>>>>> as
>>>>> the
>>>>> same board can end up being sold under multiple model numbers.
>>>>>
>>>>> So please rename the file to bcm47094-linksys-panamera.dts
>>>>
>>>> Huh? Where did you get panamera name from?!
>>>
>>> Your manners shine on these dark days of winter. For about a decade now,
>>> http://192.168.1.1/sysinfo.cgi will show you quite a bit of information
>>> if
>>> you are too lazy to look into the GPL tarball or at the original
>>> bootlogs.
>>
>> Sadly Linksys doesn't sponsor me or provide me any hardware. The
>> bootlogs I found:
>> https://www.snbforums.com/threads/ea9500-serial-console-to-cfe.35228/
>> http://www.dd-wrt.com/phpBB2/viewtopic.php?t=288470&start=30
>> didn't include board name. As you probably can guess
>> http://192.168.1.1/ was useful in my case as well.
>>
>
> I've guessed you have the hardware - so you're submitting dts files without
> testing it? I know they don't do much, but still, this is an interesting
> concept.

I'm sending what was tested by EA9500 user:
https://forum.lede-project.org/t/lede-tested-on-linksys-ea9500/1612

I'm planning to add better support for this device, but it requires
extra testing which may take some time. So I just started with what I
can provide so far.

-- 
Rafał