[PATCH v4 01/36] [media] dt-bindings: Add bindings for i.MX media driver

[Steve Longerbeam]

On 02/16/2017 03:54 AM, Philipp Zabel wrote:
> On Wed, 2017-02-15 at 18:19 -0800, Steve Longerbeam wrote:
>> Add bindings documentation for the i.MX media driver.
>>
>> Signed-off-by: Steve Longerbeam <steve_longerbeam at mentor.com>
>> ---
>>  Documentation/devicetree/bindings/media/imx.txt | 66 +++++++++++++++++++++++++
>>  1 file changed, 66 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/imx.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/imx.txt b/Documentation/devicetree/bindings/media/imx.txt
>> new file mode 100644
>> index 0000000..fd5af50
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/imx.txt
>> @@ -0,0 +1,66 @@
>> +Freescale i.MX Media Video Device
>> +=================================
>> +
>> +Video Media Controller node
>> +---------------------------
>> +
>> +This is the media controller node for video capture support. It is a
>> +virtual device that lists the camera serial interface nodes that the
>> +media device will control.
>> +
>> +Required properties:
>> +- compatible : "fsl,imx-capture-subsystem";
>> +- ports      : Should contain a list of phandles pointing to camera
>> +		sensor interface ports of IPU devices
>> +
>> +example:
>> +
>> +capture-subsystem {
>> +	compatible = "fsl,capture-subsystem";
>
> "fsl,imx-capture-subsystem"


Fixed.

Steve