[PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge

Emil Velikov emil.l.velikov at gmail.com
Wed Feb 1 17:46:20 PST 2017


On 1 February 2017 at 11:35, Daniel Vetter <daniel at ffwll.ch> wrote:
> On Wed, Feb 01, 2017 at 10:58:43AM +0000, Peter Senna Tschudin wrote:
>> Hi Archit,
>>
>> On 01 February, 2017 10:44 CET, Archit Taneja <architt at codeaurora.org> wrote:
>>
>> >
>> >
>> > On 01/30/2017 10:35 PM, Jani Nikula wrote:
>> > > On Sat, 28 Jan 2017, Peter Senna Tschudin <peter.senna at collabora.com> wrote:
>> > >> On Thu, Jan 05, 2017 at 01:18:47PM +0530, Archit Taneja wrote:
>> > >> Hi Archit,
>> > >>
>> > >> Thank you for the comments!
>> > >>
>> > >> [...]
>> > >>>> +      total_size = (block[EDID_EXT_BLOCK_CNT] + 1) * EDID_LENGTH;
>> > >>>> +      if (total_size > EDID_LENGTH) {
>> > >>>> +              kfree(block);
>> > >>>> +              block = kmalloc(total_size, GFP_KERNEL);
>> > >>>> +              if (!block)
>> > >>>> +                      return NULL;
>> > >>>> +
>> > >>>> +              /* Yes, read the entire buffer, and do not skip the first
>> > >>>> +               * EDID_LENGTH bytes.
>> > >>>> +               */
>> > >>>
>> > >>> Is this the reason why you aren't using drm_do_get_edid()?
>>
>> > >>
>> > >> Yes, for some hw specific reason, it is necessary to read the entire
>> > >> EDID buffer starting from 0, not block by block.
>> > >
>> > > Hrmh, I'm planning on moving the edid override and firmware edid
>> > > mechanisms at the drm_do_get_edid() level to be able to truly and
>> > > transparently use a different edid. Currently, they're only used for
>> > > modes, really, and lead to some info retrieved from overrides, some from
>> > > the real edid. This kind of hacks will bypass the override/firmware edid
>> > > mechanisms then too. :(
>> >
>> > It seems like there is a HW issue which prevents them from reading EDID
>> > from an offset. So, I'm not sure if it is a hack or a HW limitation.
>>
>> >
>> > One way around this would be to hide the HW requirement in the
>> > get_edid_block func pointer passed to drm_do_get_edid(). This
>> > would, however, result in more i2c reads (equal to # of extension
>> > blocks) than what the patch currently does.
>> >
>> > Peter, if you think doing extra EDID reads isn't too costly on your
>> > platform, you could consider using drm_do_get_edid(). If not, I guess
>> > you'll miss out on the additional functionality Jani is going to add
>>
>> > in the future.
>>
>> My concern is that for almost one year now, every time I fix something
>> one or two new requests are made. I'm happy to fix the driver, but I
>> want a list of the changes that are required to get it upstream, before
>> I make more changes. Can we agree on exactly what is preventing this
>> driver to get upstream? Then I'll fix it.
>
> I think addressing this edid reading question post-merge is perfectly
> fine. Aside, want to keep maintaing your stuff as part of the drm-misc
> group, with the drivers-in-misc experiment?

Wasn't there some entry level for people ? It's not like Peter is
thick or anything, just that he has not reviewed or replied (afaict)
to any patches, even on ones where he was explicitly cc'd.
Although he's got dozens of contributions elsewhere, there's only a
single patch of his in DRM.

-Emil



More information about the linux-arm-kernel mailing list