[PATCH 2/2] ARM: dts: Add the PWM node to Cygnus

Eric Anholt eric at anholt.net
Thu Aug 31 11:54:16 PDT 2017


This is connected up to the backlight on 911360_entphn, which we'll
need for a panel driver.  For now, leave the node disabled in the
shared dtsi.

Signed-off-by: Eric Anholt <eric at anholt.net>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 74f73ff24aec..b9a654d733ae 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -585,6 +585,14 @@
 			status = "disabled";
 		};
 
+		pwm: pwm at 180aa500 {
+			compatible = "brcm,kona-pwm";
+			reg = <0x180aa500 0xc4>;
+			#pwm-cells = <3>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
+			status = "disabled";
+		};
+
 		keypad: keypad at 180ac000 {
 			compatible = "brcm,bcm-keypad";
 			reg = <0x180ac000 0x14c>;
-- 
2.14.1




More information about the linux-arm-kernel mailing list