[PATCH 2/2] ARM: dts: r8a7743: Add I2C DT support

Simon Horman horms at verge.net.au
Wed Aug 9 01:52:38 PDT 2017


On Tue, Aug 08, 2017 at 12:24:09PM +0100, Biju Das wrote:
> Add the I2C[0-5] devices to the r8a7743 device tree.
> 
> Signed-off-by: Biju Das <biju.das at bp.renesas.com>
> ---
> This patch has been tested against Linux-next tag 20170727 and renesas-dev branch.
> This patch depends on https://www.mail-archive.com/linux-renesas-soc@vger.kernel.org/msg17008.html

As per the patch at the link above it seems that these patches are targeted
at the renesas tree.  The best practice in that case is to base patches on
the latest devel branch. Please consider doing so in future.

I would also slightly prefer if dependencies were referenced by name, in
this case:

*  [PATCH 2/3] ARM: dts: r8a7743: Add APMU node and second CPU core

or

* [PATCH  0/3] Add SMP support

Also including a link is fine by me.


It would also be useful if you described the dependency as a conflict
(merge-time), compile-time or run-time.

As for the patch itself, it looks good to me.

>  arch/arm/boot/dts/r8a7743.dtsi | 97 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 97 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
> index 8c46f62..14222c72 100644
> --- a/arch/arm/boot/dts/r8a7743.dtsi
> +++ b/arch/arm/boot/dts/r8a7743.dtsi
> @@ -18,6 +18,15 @@
>  	#address-cells = <2>;
>  	#size-cells = <2>;
>  
> +	aliases {
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c1;
> +		i2c2 = &i2c2;
> +		i2c3 = &i2c3;
> +		i2c4 = &i2c4;
> +		i2c5 = &i2c5;
> +	};
> +
>  	cpus {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> @@ -339,6 +348,94 @@
>  			dma-channels = <15>;
>  		};
>  
> +		/* The memory map in the User's Manual maps the cores to bus
> +		 *  numbers
> +		 */
> +		i2c0: i2c at e6508000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a7743",
> +				     "renesas,rcar-gen2-i2c";
> +			reg = <0 0xe6508000 0 0x40>;
> +			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 931>;
> +			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
> +			resets = <&cpg 931>;
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c at e6518000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a7743",
> +				     "renesas,rcar-gen2-i2c";
> +			reg = <0 0xe6518000 0 0x40>;
> +			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 930>;
> +			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
> +			resets = <&cpg 930>;
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c2: i2c at e6530000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a7743",
> +				     "renesas,rcar-gen2-i2c";
> +			reg = <0 0xe6530000 0 0x40>;
> +			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 929>;
> +			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
> +			resets = <&cpg 929>;
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c3: i2c at e6540000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a7743",
> +				     "renesas,rcar-gen2-i2c";
> +			reg = <0 0xe6540000 0 0x40>;
> +			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 928>;
> +			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
> +			resets = <&cpg 928>;
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c4: i2c at e6520000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a7743",
> +				     "renesas,rcar-gen2-i2c";
> +			reg = <0 0xe6520000 0 0x40>;
> +			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 927>;
> +			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
> +			resets = <&cpg 927>;
> +			i2c-scl-internal-delay-ns = <6>;
> +			status = "disabled";
> +		};
> +
> +		i2c5: i2c at e6528000 {
> +			/* doesn't need pinmux */
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "renesas,i2c-r8a7743",
> +				     "renesas,rcar-gen2-i2c";
> +			reg = <0 0xe6528000 0 0x40>;
> +			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 925>;
> +			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
> +			resets = <&cpg 925>;
> +			i2c-scl-internal-delay-ns = <110>;
> +			status = "disabled";
> +		};
> +
>  		scifa0: serial at e6c40000 {
>  			compatible = "renesas,scifa-r8a7743",
>  				     "renesas,rcar-gen2-scifa", "renesas,scifa";
> -- 
> 1.9.1
> 



More information about the linux-arm-kernel mailing list