[PATCH v3] arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2

Sean Wang sean.wang at mediatek.com
Thu Aug 3 01:38:58 PDT 2017


Hi, Matthias,

Ryder and me tried to make the patch better, so the delivery is made in
v3,  including add missing pin  state for mmc1 and remove wp-gpio
because the board only has micro-sd slot that can't be adjusted for the
lock manually. And also some cleanups are made for nodes sorted in
alphabetical order. Thanks for Ryder to catch.

	Sean

On Thu, 2017-08-03 at 16:29 +0800, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang at mediatek.com>
> 
> The bananapi-r2 board has an SD-card controller and built-in
> EMMC storage so enables those devices in the devicetree. Also
> cleanup nodes in alphabetical order in the patch.
> 
> Signed-off-by: Matthias Brugger <matthias.bgg at gmail.com>
> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> Signed-off-by: Ryder Lee <ryder.lee at mediatek.com>
> ---
>  arch/arm/boot/dts/mt7623.dtsi                 | 73 ++++++++++++++-------------
>  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 73 ++++++++++++++++++++-------
>  2 files changed, 94 insertions(+), 52 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 2a877ed..ec8a074 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -91,6 +91,7 @@
>  			cooling-max-level = <7>;
>  			clock-frequency = <1300000000>;
>  		};
> +
>  		cpu1: cpu at 1 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a7";
> @@ -98,6 +99,7 @@
>  			operating-points-v2 = <&cpu_opp_table>;
>  			clock-frequency = <1300000000>;
>  		};
> +
>  		cpu2: cpu at 2 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a7";
> @@ -105,6 +107,7 @@
>  			operating-points-v2 = <&cpu_opp_table>;
>  			clock-frequency = <1300000000>;
>  		};
> +
>  		cpu3: cpu at 3 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a7";
> @@ -172,10 +175,12 @@
>  					trip = <&cpu_passive>;
>  					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>  				};
> +
>  				map1 {
>  					trip = <&cpu_active>;
>  					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>  				};
> +
>  				map2 {
>  					trip = <&cpu_hot>;
>  					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> @@ -481,6 +486,31 @@
>  		nvmem-cell-names = "calibration-data";
>  	};
>  
> +	nandc: nfi at 1100d000 {
> +		compatible = "mediatek,mt7623-nfc",
> +			     "mediatek,mt2701-nfc";
> +		reg = <0 0x1100d000 0 0x1000>;
> +		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
> +		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
> +		clocks = <&pericfg CLK_PERI_NFI>,
> +			 <&pericfg CLK_PERI_NFI_PAD>;
> +		clock-names = "nfi_clk", "pad_clk";
> +		status = "disabled";
> +		ecc-engine = <&bch>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +
> +	bch: ecc at 1100e000 {
> +		compatible = "mediatek,mt7623-ecc",
> +			     "mediatek,mt2701-ecc";
> +		reg = <0 0x1100e000 0 0x1000>;
> +		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&pericfg CLK_PERI_NFI_ECC>;
> +		clock-names = "nfiecc_clk";
> +		status = "disabled";
> +	};
> +
>  	spi1: spi at 11016000 {
>  		compatible = "mediatek,mt7623-spi",
>  			     "mediatek,mt2701-spi";
> @@ -509,31 +539,6 @@
>  		status = "disabled";
>  	};
>  
> -	nandc: nfi at 1100d000 {
> -		compatible = "mediatek,mt7623-nfc",
> -			     "mediatek,mt2701-nfc";
> -		reg = <0 0x1100d000 0 0x1000>;
> -		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
> -		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
> -		clocks = <&pericfg CLK_PERI_NFI>,
> -			 <&pericfg CLK_PERI_NFI_PAD>;
> -		clock-names = "nfi_clk", "pad_clk";
> -		status = "disabled";
> -		ecc-engine = <&bch>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -	};
> -
> -	bch: ecc at 1100e000 {
> -		compatible = "mediatek,mt7623-ecc",
> -			     "mediatek,mt2701-ecc";
> -		reg = <0 0x1100e000 0 0x1000>;
> -		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> -		clocks = <&pericfg CLK_PERI_NFI_ECC>;
> -		clock-names = "nfiecc_clk";
> -		status = "disabled";
> -	};
> -
>  	afe: audio-controller at 11220000 {
>  		compatible = "mediatek,mt7623-audio",
>  			     "mediatek,mt2701-audio";
> @@ -655,6 +660,15 @@
>  		status = "disabled";
>  	};
>  
> +	hifsys: syscon at 1a000000 {
> +		compatible = "mediatek,mt7623-hifsys",
> +			     "mediatek,mt2701-hifsys",
> +			     "syscon";
> +		reg = <0 0x1a000000 0 0x1000>;
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +	};
> +
>  	usb1: usb at 1a1c0000 {
>  		compatible = "mediatek,mt7623-xhci",
>  			     "mediatek,mt8173-xhci";
> @@ -733,15 +747,6 @@
>  		};
>  	};
>  
> -	hifsys: syscon at 1a000000 {
> -		compatible = "mediatek,mt7623-hifsys",
> -			     "mediatek,mt2701-hifsys",
> -			     "syscon";
> -		reg = <0 0x1a000000 0 0x1000>;
> -		#clock-cells = <1>;
> -		#reset-cells = <1>;
> -	};
> -
>  	ethsys: syscon at 1b000000 {
>  		compatible = "mediatek,mt7623-ethsys",
>  			     "mediatek,mt2701-ethsys",
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 9f3e6dd..0aa1c69 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -179,6 +179,32 @@
>  	status = "okay";
>  };
>  
> +&mmc0 {
> +	pinctrl-names = "default", "state_uhs";
> +	pinctrl-0 = <&mmc0_pins_default>;
> +	pinctrl-1 = <&mmc0_pins_uhs>;
> +	status = "okay";
> +	bus-width = <8>;
> +	max-frequency = <50000000>;
> +	cap-mmc-highspeed;
> +	vmmc-supply = <&mt6323_vemc3v3_reg>;
> +	vqmmc-supply = <&mt6323_vio18_reg>;
> +	non-removable;
> +};
> +
> +&mmc1 {
> +	pinctrl-names = "default", "state_uhs";
> +	pinctrl-0 = <&mmc1_pins_default>;
> +	pinctrl-1 = <&mmc1_pins_uhs>;
> +	status = "okay";
> +	bus-width = <4>;
> +	max-frequency = <50000000>;
> +	cap-sd-highspeed;
> +	cd-gpios = <&pio 261 0>;
> +	vmmc-supply = <&mt6323_vmch_reg>;
> +	vqmmc-supply = <&mt6323_vio18_reg>;
> +};
> +
>  &pio {
>  	cir_pins_a:cir at 0 {
>  		pins_cir {
> @@ -314,6 +340,17 @@
>  			bias-pull-down;
>  			drive-strength = <MTK_DRIVE_4mA>;
>  		};
> +
> +		pins_wp {
> +			pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
> +			input-enable;
> +			bias-pull-up;
> +		};
> +
> +		pins_insert {
> +			pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
> +			bias-pull-up;
> +		};
>  	};
>  
>  	mmc1_pins_uhs: mmc1 {
> @@ -335,16 +372,6 @@
>  		};
>  	};
>  
> -	spi0_pins_a: spi at 0 {
> -		pins_spi {
> -			pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
> -				<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
> -				<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
> -				<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
> -			bias-disable;
> -		};
> -	};
> -
>  	pwm_pins_a: pwm at 0 {
>  		pins_pwm {
>  			pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
> @@ -355,6 +382,16 @@
>  		};
>  	};
>  
> +	spi0_pins_a: spi at 0 {
> +		pins_spi {
> +			pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
> +				<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
> +				<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
> +				<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
> +			bias-disable;
> +		};
> +	};
> +
>  	uart0_pins_a: uart at 0 {
>  		pins_dat {
>  			pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
> @@ -414,14 +451,6 @@
>  	status = "disabled";
>  };
>  
> -&u3phy1 {
> -	status = "okay";
> -};
> -
> -&u3phy2 {
> -	status = "okay";
> -};
> -
>  &uart1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&uart1_pins_a>;
> @@ -441,3 +470,11 @@
>  	vusb33-supply = <&mt6323_vusb_reg>;
>  	status = "okay";
>  };
> +
> +&u3phy1 {
> +	status = "okay";
> +};
> +
> +&u3phy2 {
> +	status = "okay";
> +};





More information about the linux-arm-kernel mailing list