[PATCH v2 11/30] arm: dts: mt7623: add nand nodes to the mt7623.dtsi file

sean.wang at mediatek.com sean.wang at mediatek.com
Wed Apr 26 05:25:55 EDT 2017


From: John Crispin <john at phrozen.org>

Add NAND/EEC nodes to the mt7623.dtsi file.

Signed-off-by: John Crispin <john at phrozen.org>
Signed-off-by: Sean Wang <sean.wang at mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 131808c..f15d65a 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -330,6 +330,31 @@
 		status = "disabled";
 	};
 
+	nandc: nfi at 1100d000 {
+		compatible = "mediatek,mt7623-nfc",
+			     "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	bch: ecc at 1100e000 {
+		compatible = "mediatek,mt7623-ecc",
+			     "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
 	hifsys: syscon at 1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.9.1




More information about the linux-arm-kernel mailing list