[PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards

[Inki Dae]

2017년 04월 25일 10:54에 Hoegeun Kwon 이(가) 쓴 글:
> The decon uses HW-TRIGGER, so TE interrupt is not necessary.
> Therefore, remove the te-gpios property in the TM2 dts.
> 
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
> ---
>  arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> index 3ff9527..23191eb 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -60,7 +60,6 @@
>  		vci-supply = <&ldo28_reg>;
>  		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
>  		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
> -		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;

Reviewed-by: Inki Dae <inki.dae at samsung.com>

Thanks,
Inki Dae

>  	};
>  };
>  
>