[PATCH] net: stmmac: Add OXNAS Glue Driver

Neil Armstrong narmstrong at baylibre.com
Mon Oct 31 03:25:43 PDT 2016


On 10/31/2016 11:20 AM, Joachim Eastwood wrote:
> Hi Neil,
> 
> On 31 October 2016 at 10:55, Neil Armstrong <narmstrong at baylibre.com> wrote:
>> On 10/30/2016 09:41 PM, Rob Herring wrote:
>>> On Fri, Oct 21, 2016 at 10:44:45AM +0200, Neil Armstrong wrote:
>>>> Add Synopsys Designware MAC Glue layer for the Oxford Semiconductor OX820.
>>>>
>>>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>>>> ---
>>>>  .../devicetree/bindings/net/oxnas-dwmac.txt        |  44 +++++
>>>
>>> It's preferred that bindings are a separate patch.
>>
>> OK
>>
>>>
>>>>  drivers/net/ethernet/stmicro/stmmac/Kconfig        |  11 ++
>>>>  drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
>>>>  drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c  | 219 +++++++++++++++++++++
>>>>  4 files changed, 275 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/net/oxnas-dwmac.txt
>>>>  create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
>>>>
>>>> Changes since RFC at https://patchwork.kernel.org/patch/9387257 :
>>>>  - Drop init/exit callbacks
>>>>  - Implement proper remove and PM callback
>>>>  - Call init from probe
>>>>  - Disable/Unprepare clock if stmmac probe fails
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
>>>> new file mode 100644
>>>> index 0000000..5d2696c
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
>>>> @@ -0,0 +1,44 @@
>>>> +* Oxford Semiconductor OXNAS DWMAC Ethernet controller
>>>> +
>>>> +The device inherits all the properties of the dwmac/stmmac devices
>>>> +described in the file stmmac.txt in the current directory with the
>>>> +following changes.
>>>> +
>>>> +Required properties on all platforms:
>>>> +
>>>> +- compatible:       Depending on the platform this should be one of:
>>>> +                    - "oxsemi,ox820-dwmac"
>>>> +            Additionally "snps,dwmac" and any applicable more
>>>> +            detailed version number described in net/stmmac.txt
>>>> +            should be used.
>>>
>>> You should be explicit what version applies to ox820. "snps,dwmac"
>>> should probably be deprecated IMO. There are so many variations of DW
>>> h/w.
>>
>> Well, to be honest I have absolutely no idea ! But I will try to find out...
> 
> You can see in the boot log:
> 
> From lpc18xx boot:
> [    3.242253] stmmac - user ID: 0x11, Synopsys ID: 0x36
> [    3.247653]  Ring mode enabled
> [    3.251491]  DMA HW capability register supported
> [    3.256336]  Enhanced/Alternate descriptors
> [    3.261537]  Enabled extended descriptors
> [    3.265968]  RX Checksum Offload Engine supported (type 2)
> [    3.272249]  TX Checksum insertion supported
> [    3.276874]  Wake-Up On Lan supported
> [    3.283743]  Enable RX Mitigation via HW Watchdog Timer
> [    3.326701] libphy: stmmac: probed
> 
> Synopsys ID: 0x36 and user UD: 0x11, gives us DWMAC version 3.611
> 
> 
> regards,
> Joachim Eastwood
> 
OK, thanks !

stmmac - user ID: 0x12, Synopsys ID: 0x35

Neil




More information about the linux-arm-kernel mailing list