[PATCH V7 2/3] ACPI: Add support for ResourceSource/IRQ domain mapping
Lorenzo Pieralisi
lorenzo.pieralisi at arm.com
Thu Nov 24 08:15:48 PST 2016
Hi Agustin,
On Sun, Nov 13, 2016 at 04:59:34PM -0500, Agustin Vega-Frias wrote:
> When an Extended IRQ Resource contains a valid ResourceSource
> use it to map the IRQ on the domain associated with the ACPI
> device referenced.
>
> With this in place an irqchip driver can create its domain using
> irq_domain_create_linear and pass the device fwnode to create
> the domain mapping. When dependent devices are probed these
> changes allow the ACPI core find the domain and map the IRQ.
>
> Signed-off-by: Agustin Vega-Frias <agustinv at codeaurora.org>
> ---
> drivers/acpi/Makefile | 2 +-
> drivers/acpi/{gsi.c => irq.c} | 98 +++++++++++++++++++++++++++++++++++++------
> drivers/acpi/resource.c | 29 +++++++------
> include/linux/acpi.h | 19 +++++++++
> 4 files changed, 121 insertions(+), 27 deletions(-)
> rename drivers/acpi/{gsi.c => irq.c} (53%)
It looks to me the direction is the right one but I have a question
for you and others below.
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 9ed0878..a391bbc 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -55,7 +55,7 @@ acpi-$(CONFIG_DEBUG_FS) += debugfs.o
> acpi-$(CONFIG_ACPI_NUMA) += numa.o
> acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o
> acpi-y += acpi_lpat.o
> -acpi-$(CONFIG_ACPI_GENERIC_GSI) += gsi.o
> +acpi-$(CONFIG_ACPI_GENERIC_GSI) += irq.o
> acpi-$(CONFIG_ACPI_WATCHDOG) += acpi_watchdog.o
>
> # These are (potentially) separate modules
> diff --git a/drivers/acpi/gsi.c b/drivers/acpi/irq.c
> similarity index 53%
> rename from drivers/acpi/gsi.c
> rename to drivers/acpi/irq.c
> index ee9e0f2..c6ecaab 100644
> --- a/drivers/acpi/gsi.c
> +++ b/drivers/acpi/irq.c
> @@ -18,6 +18,45 @@
> static struct fwnode_handle *acpi_gsi_domain_id;
>
> /**
> + * acpi_get_irq_source_fwhandle() - Retrieve the fwhandle of the given
> + * acpi_resource_source which is used
> + * to be used as an IRQ domain id
> + * @source: acpi_resource_source to use for the lookup
> + *
> + * Returns: The appropriate IRQ fwhandle domain id
> + * NULL on failure
> + */
> +struct fwnode_handle *
> +acpi_get_irq_source_fwhandle(const struct acpi_resource_source *source)
> +{
> + struct fwnode_handle *result;
> + struct acpi_device *device;
> + acpi_handle handle;
> + acpi_status status;
> +
> + if (!source->string_length)
> + return acpi_gsi_domain_id;
> +
> + status = acpi_get_handle(NULL, source->string_ptr, &handle);
> + if (ACPI_FAILURE(status)) {
> + pr_warn("Could not find handle for %s\n", source->string_ptr);
> + return NULL;
> + }
> +
> + device = acpi_bus_get_acpi_device(handle);
> + if (!device) {
> + pr_warn("Could not get device for %s\n", source->string_ptr);
> + return NULL;
> + }
> +
> + result = &device->fwnode;
> + acpi_bus_put_acpi_device(device);
> +
> + return result;
> +}
> +EXPORT_SYMBOL_GPL(acpi_get_irq_source_fwhandle);
> +
> +/**
> * acpi_gsi_to_irq() - Retrieve the linux irq number for a given GSI
> * @gsi: GSI IRQ number to map
> * @irq: pointer where linux IRQ number is stored
> @@ -42,6 +81,50 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
> EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
>
> /**
> + * acpi_register_irq() - Map a hardware to a linux IRQ number
> + * @source: IRQ source
> + * @hwirq: Hardware IRQ number
> + * @trigger: trigger type of the IRQ number to be mapped
> + * @polarity: polarity of the IRQ to be mapped
> + *
> + * Returns: a valid linux IRQ number on success
> + * -EINVAL on failure
Nit: You need to update the return values list.
> + */
> +int acpi_register_irq(struct fwnode_handle *source, u32 hwirq, int trigger,
> + int polarity)
> +{
> + struct irq_fwspec fwspec;
> +
> + if (!source)
> + return -EINVAL;
> +
> + if (irq_find_matching_fwnode(source, DOMAIN_BUS_ANY) == NULL)
> + return -EPROBE_DEFER;
> +
> + fwspec.fwnode = source;
> + fwspec.param[0] = hwirq;
> + fwspec.param[1] = acpi_dev_get_irq_type(trigger, polarity);
> + fwspec.param_count = 2;
> +
> + return irq_create_fwspec_mapping(&fwspec);
> +}
> +EXPORT_SYMBOL_GPL(acpi_register_irq);
> +
> +/**
> + * acpi_unregister_irq() - Free a Hardware IRQ<->linux IRQ number mapping
> + * @hwirq: Hardware IRQ number
> + */
> +void acpi_unregister_irq(struct fwnode_handle *source, u32 hwirq)
> +{
> + struct irq_domain *d = irq_find_matching_fwnode(source,
> + DOMAIN_BUS_ANY);
> + int irq = irq_find_mapping(d, hwirq);
> +
> + irq_dispose_mapping(irq);
> +}
> +EXPORT_SYMBOL_GPL(acpi_unregister_irq);
> +
> +/**
> * acpi_register_gsi() - Map a GSI to a linux IRQ number
> * @dev: device for which IRQ has to be mapped
> * @gsi: GSI IRQ number
> @@ -54,19 +137,12 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
> int acpi_register_gsi(struct device *dev, u32 gsi, int trigger,
> int polarity)
> {
> - struct irq_fwspec fwspec;
> -
> if (WARN_ON(!acpi_gsi_domain_id)) {
> pr_warn("GSI: No registered irqchip, giving up\n");
> return -EINVAL;
> }
>
> - fwspec.fwnode = acpi_gsi_domain_id;
> - fwspec.param[0] = gsi;
> - fwspec.param[1] = acpi_dev_get_irq_type(trigger, polarity);
> - fwspec.param_count = 2;
> -
> - return irq_create_fwspec_mapping(&fwspec);
> + return acpi_register_irq(acpi_gsi_domain_id, gsi, trigger, polarity);
> }
> EXPORT_SYMBOL_GPL(acpi_register_gsi);
>
> @@ -76,11 +152,7 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger,
> */
> void acpi_unregister_gsi(u32 gsi)
> {
> - struct irq_domain *d = irq_find_matching_fwnode(acpi_gsi_domain_id,
> - DOMAIN_BUS_ANY);
> - int irq = irq_find_mapping(d, gsi);
> -
> - irq_dispose_mapping(irq);
> + acpi_unregister_irq(acpi_gsi_domain_id, gsi);
> }
> EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
>
> diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
> index 4beda15..83cff00 100644
> --- a/drivers/acpi/resource.c
> +++ b/drivers/acpi/resource.c
> @@ -374,21 +374,22 @@ unsigned int acpi_dev_get_irq_type(int triggering, int polarity)
> }
> EXPORT_SYMBOL_GPL(acpi_dev_get_irq_type);
>
> -static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
> +static void acpi_dev_irqresource_disabled(struct resource *res, u32 hwirq)
> {
> - res->start = gsi;
> - res->end = gsi;
> + res->start = hwirq;
> + res->end = hwirq;
> res->flags = IORESOURCE_IRQ | IORESOURCE_DISABLED | IORESOURCE_UNSET;
> }
>
> -static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
> +static void acpi_dev_get_irqresource(struct resource *res, u32 hwirq,
> + struct fwnode_handle *source,
> u8 triggering, u8 polarity, u8 shareable,
> bool legacy)
> {
> int irq, p, t;
>
> - if (!valid_IRQ(gsi)) {
> - acpi_dev_irqresource_disabled(res, gsi);
> + if (!source && !valid_IRQ(hwirq)) {
> + acpi_dev_irqresource_disabled(res, hwirq);
> return;
> }
>
> @@ -402,25 +403,25 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
> * using extended IRQ descriptors we take the IRQ configuration
> * from _CRS directly.
> */
> - if (legacy && !acpi_get_override_irq(gsi, &t, &p)) {
> + if (legacy && !acpi_get_override_irq(hwirq, &t, &p)) {
> u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
> u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
>
> if (triggering != trig || polarity != pol) {
> - pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi,
> - t ? "level" : "edge", p ? "low" : "high");
> + pr_warn("ACPI: IRQ %d override to %s, %s\n", hwirq,
> + t ? "level" : "edge", p ? "low" : "high");
> triggering = trig;
> polarity = pol;
> }
> }
>
> res->flags = acpi_dev_irq_flags(triggering, polarity, shareable);
> - irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
> + irq = acpi_register_irq(source, hwirq, triggering, polarity);
> if (irq >= 0) {
> res->start = irq;
> res->end = irq;
> } else {
> - acpi_dev_irqresource_disabled(res, gsi);
> + acpi_dev_irqresource_disabled(res, hwirq);
> }
> }
>
> @@ -448,6 +449,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
> {
> struct acpi_resource_irq *irq;
> struct acpi_resource_extended_irq *ext_irq;
> + struct fwnode_handle *src;
>
> switch (ares->type) {
> case ACPI_RESOURCE_TYPE_IRQ:
> @@ -460,7 +462,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
> acpi_dev_irqresource_disabled(res, 0);
> return false;
> }
> - acpi_dev_get_irqresource(res, irq->interrupts[index],
> + acpi_dev_get_irqresource(res, irq->interrupts[index], NULL,
> irq->triggering, irq->polarity,
> irq->sharable, true);
> break;
> @@ -470,7 +472,8 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
> acpi_dev_irqresource_disabled(res, 0);
> return false;
> }
> - acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
> + src = acpi_get_irq_source_fwhandle(&ext_irq->resource_source);
Is there a reason why we need to do the domain look-up here ?
I would like to understand if, by reshuffling the code (and by returning
the resource_source to the calling code - somehow), it would be possible
to just mirror what the OF code does in of_irq_get(), namely:
(1) parse the irq entry -> of_irq_parse_one()
(2) look the domain up -> irq_find_host()
(3) create the mapping -> irq_create_of_mapping()
You wrote the code already, I think it is just a matter of shuffling
it around (well, minus returning the resource_source to the caller
which is phandle equivalent in DT).
You abstracted away (2) and (3) behind acpi_register_irq(), that
on anything than does not use ACPI_GENERIC_GSI is just glue code
to acpi_register_gsi().
Also, it is not a question on this patch but I ask it here because it
is related. On ACPI you are doing the reverse of what is done in
DT in platform_get_irq():
- get the resources already parsed -> platform_get_resource()
- if they are disabled -> acpi_irq_get()
and I think the ordering is tied to my question above because
you carry out the domain look up in acpi_dev_resource_interrupt()
so that if for any reason it fails the corresponding resource
is disabled so that we try to get it again through acpi_irq_get().
I suspect you did it this way to make sure:
a) keep the current ACPI IRQ parsing interface changes to a mininum
b) avoid changing the behaviour on x86/ia64; in particular, calling
acpi_register_gsi() for the _same_ mapping (an IRQ that was already
registered at device creation resource parsing) multiple times can
trigger issues on x86/ia64
I think that's a reasonable approach but I wanted to get these
clarifications, I do not think you are far from getting this
done but since it is a significant change I think it is worth
discussing the points I raised above because I think the DT code
sequence in of_irq_get() (1-2-3 above) is cleaner from an IRQ
layer perspective (instead of having the domain look-up buried
inside the ACPI IRQ resource parsing API).
Thanks !
Lorenzo
> + acpi_dev_get_irqresource(res, ext_irq->interrupts[index], src,
> ext_irq->triggering, ext_irq->polarity,
> ext_irq->sharable, false);
> break;
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 325bdb9..1099b51 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -321,6 +321,25 @@ void acpi_set_irq_model(enum acpi_irq_model_id model,
> */
> void acpi_unregister_gsi (u32 gsi);
>
> +#ifdef CONFIG_ACPI_GENERIC_GSI
> +struct fwnode_handle *
> +acpi_get_irq_source_fwhandle(const struct acpi_resource_source *source);
> +int acpi_register_irq(struct fwnode_handle *source, u32 hwirq, int trigger,
> + int polarity);
> +void acpi_unregister_irq(struct fwnode_handle *source, u32 hwirq);
> +#else
> +#define acpi_get_irq_source_fwhandle(source) (NULL)
> +static inline int acpi_register_irq(struct fwnode_handle *source, u32 hwirq,
> + int trigger, int polarity)
> +{
> + return acpi_register_gsi(NULL, hwirq, trigger, polarity);
> +}
> +static inline void acpi_unregister_irq(struct fwnode_handle *source, u32 hwirq)
> +{
> + acpi_unregister_gsi(hwirq);
> +}
> +#endif
> +
> struct pci_dev;
>
> int acpi_pci_irq_enable (struct pci_dev *dev);
> --
> Qualcomm Datacenter Technologies, Inc. on behalf of the Qualcomm Technologies, Inc.
> Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
>
More information about the linux-arm-kernel
mailing list