[PATCH RESEND 2/2] gpio: axp209: add pinctrl support

Linus Walleij linus.walleij at linaro.org
Thu Nov 24 06:17:36 PST 2016


On Wed, Nov 23, 2016 at 3:11 PM, Quentin Schulz
<quentin.schulz at free-electrons.com> wrote:

> The GPIOs present in the AXP209 PMIC have multiple functions. They
> typically allow a pin to be used as GPIO input or output and can also be
> used as ADC or regulator for example.[1]
>
> This adds the possibility to use all functions of the GPIOs present in
> the AXP209 PMIC thanks to pinctrl subsystem.
>
> [1] see registers 90H, 92H and 93H at
>     http://dl.linux-sunxi.org/AXP/AXP209_Datasheet_v1.0en.pdf
>
> Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>

I need Maxime's review on this patch.

>  .../devicetree/bindings/gpio/gpio-axp209.txt       |  28 +-

Also move the bindings to pinctrl/pinctrl-axp209.txt

>  drivers/gpio/gpio-axp209.c                         | 551 ++++++++++++++++++---

Combined drivers should be in drivers/pinctrl/*.

Make a separate patch moving the driver to
drivers/pinctrl/pinctrl-axp209.c (remember -M to git format-patch)
augment Kconfig and Makefile in both subsystems and make
these patches on top of that.

I will deal with cross-merging the result between the GPIO
and pin control trees.

Yours,
Linus Walleij



More information about the linux-arm-kernel mailing list