[PATCH 3/3] ARM: dts: da850: Add node for pullup/pulldown pinconf

David Lechner david at lechnology.com
Wed Nov 23 08:24:06 PST 2016


On 11/23/2016 05:12 AM, Sekhar Nori wrote:
> On Wednesday 23 November 2016 08:59 AM, David Lechner wrote:
>> This SoC has a separate pin controller for configuring pullup/pulldown
>> bias on groups of pins.
>>
>> Signed-off-by: David Lechner <david at lechnology.com>
>> ---
>>  arch/arm/boot/dts/da850.dtsi | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
>> index 8945815..1c0224c 100644
>> --- a/arch/arm/boot/dts/da850.dtsi
>> +++ b/arch/arm/boot/dts/da850.dtsi
>> @@ -210,6 +210,11 @@
>>  			};
>>
>>  		};
>> +		pinconf: pin-controller at 22c00c {
>> +			compatible = "ti,da850-pupd";
>> +			reg = <0x22c00c 0x8>;
>> +			status = "disabled";
>> +		};
>
> Can you please place this below the i2c1 node. I am trying to keep the
> nodes sorted by unit address. I know thats broken in many places today,
> but lets add the new ones where they should eventually end up.

I can do this, but it seems that the predominant sorting pattern here is 
to keep subsystems together (e.g. all i2c are together, all uart are 
together, etc.)

Would a separate patch to sort everything by unit address to get this 
cleaned up be acceptable?

>
> Thanks,
> Sekhar
>




More information about the linux-arm-kernel mailing list