[PATCH v2] ARM: Drop fixed 200 Hz timer requirement from Samsung platforms

Russell King - ARM Linux linux at armlinux.org.uk
Mon Nov 21 01:24:45 PST 2016


On Mon, Nov 21, 2016 at 03:01:57PM +0900, Tomasz Figa wrote:
> One thing to correct here is that the typical clock is PCLK, which is
> derived from one of the PLLs and AFAIR is between 33-66 MHz on
> s3c24xx. Technically you can drive the PWM block from an external
> clock (12 MHz for some board-file based boards), but for simplicity
> this functionality was omitted in the new PWM timer driver used for DT
> boards (which worked fine with the PWM driven by PCLK).

So that's a knowingly-made regression for s3c24xx then.  Pretty
disgusting developer behavior to do that, IMHO.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.



More information about the linux-arm-kernel mailing list