[PATCH v3 04/19] ARM: dts: armada-370-xp: Use the node labels
Gregory CLEMENT
gregory.clement at free-electrons.com
Thu Nov 17 15:04:53 PST 2016
Use the node label when possible. As a result it flattens the device tree
and it makes more visible the IP blocks specific to each SoC variant.
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
---
arch/arm/boot/dts/armada-370.dtsi | 105 +++++++++++++++++++-------------------
arch/arm/boot/dts/armada-xp.dtsi | 76 +++++++++++++--------------
2 files changed, 91 insertions(+), 90 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 5ed086da1e51..079494e52554 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -134,14 +134,6 @@
wt-override;
};
- i2c0: i2c at 11000 {
- reg = <0x11000 0x20>;
- };
-
- i2c1: i2c at 11100 {
- reg = <0x11100 0x20>;
- };
-
gpio0: gpio at 18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
@@ -175,20 +167,6 @@
interrupts = <91>;
};
- /*
- * Default UART pinctrl setting without RTS/CTS, can
- * be overwritten on board level if a different
- * configuration is used.
- */
- uart0: serial at 12000 {
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
- };
-
- uart1: serial at 12100 {
- pinctrl-0 = <&uart1_pins>;
- pinctrl-names = "default";
- };
systemc: system-controller at 18200 {
compatible = "marvell,armada-370-xp-system-controller";
@@ -219,20 +197,6 @@
reg = <0x18330 0x4>;
};
- interrupt-controller at 20a00 {
- reg = <0x20a00 0x1d0>, <0x21870 0x58>;
- };
-
- timer at 20300 {
- compatible = "marvell,armada-370-timer";
- clocks = <&coreclk 2>;
- };
-
- watchdog at 20300 {
- compatible = "marvell,armada-370-wdt";
- clocks = <&coreclk 2>;
- };
-
cpuconf: cpu-config at 21000 {
compatible = "marvell,armada-370-cpu-config";
reg = <0x21000 0x8>;
@@ -248,14 +212,6 @@
status = "disabled";
};
- usb at 50000 {
- clocks = <&coreclk 0>;
- };
-
- usb at 51000 {
- clocks = <&coreclk 0>;
- };
-
xor0: xor at 60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
@@ -294,14 +250,6 @@
};
};
- ethernet at 70000 {
- compatible = "marvell,armada-370-neta";
- };
-
- ethernet at 74000 {
- compatible = "marvell,armada-370-neta";
- };
-
cesa: crypto at 90000 {
compatible = "marvell,armada-370-crypto";
reg = <0x90000 0x10000>;
@@ -337,6 +285,59 @@
};
};
+/*
+ * Default UART pinctrl setting without RTS/CTS, can be overwritten on
+ * board level if a different configuration is used.
+ */
+
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c0 {
+ reg = <0x11000 0x20>;
+};
+
+&i2c1 {
+ reg = <0x11100 0x20>;
+};
+
+&mpic {
+ reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+};
+
+&timer {
+ compatible = "marvell,armada-370-timer";
+ clocks = <&coreclk 2>;
+};
+
+&watchdog {
+ compatible = "marvell,armada-370-wdt";
+ clocks = <&coreclk 2>;
+};
+
+&usb0 {
+ clocks = <&coreclk 0>;
+};
+
+&usb1 {
+ clocks = <&coreclk 0>;
+};
+
+ð0 {
+ compatible = "marvell,armada-370-neta";
+};
+
+ð1 {
+ compatible = "marvell,armada-370-neta";
+};
+
&pinctrl {
compatible = "marvell,mv88f6710-pinctrl";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 654a61e525b4..bb8f7dcaf656 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -84,16 +84,6 @@
wt-override;
};
- i2c0: i2c at 11000 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- i2c1: i2c at 11100 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
uart2: serial at 12200 {
compatible = "snps,dw-apb-uart";
pinctrl-0 = <&uart2_pins>;
@@ -150,26 +140,6 @@
clocks = <&coreclk 1>;
};
- interrupt-controller at 20a00 {
- reg = <0x20a00 0x2d0>, <0x21070 0x58>;
- };
-
- timer at 20300 {
- compatible = "marvell,armada-xp-timer";
- clocks = <&coreclk 2>, <&refclk>;
- clock-names = "nbclk", "fixed";
- };
-
- watchdog at 20300 {
- compatible = "marvell,armada-xp-wdt";
- clocks = <&coreclk 2>, <&refclk>;
- clock-names = "nbclk", "fixed";
- };
-
- cpurst at 20800 {
- reg = <0x20800 0x20>;
- };
-
cpu-config at 21000 {
compatible = "marvell,armada-xp-cpu-config";
reg = <0x21000 0x8>;
@@ -183,14 +153,6 @@
status = "disabled";
};
- usb at 50000 {
- clocks = <&gateclk 18>;
- };
-
- usb at 51000 {
- clocks = <&gateclk 19>;
- };
-
usb2: usb at 52000 {
compatible = "marvell,orion-ehci";
reg = <0x52000 0x500>;
@@ -308,6 +270,44 @@
};
};
+&i2c0 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x100>;
+};
+
+&mpic {
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+ compatible = "marvell,armada-xp-timer";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+ compatible = "marvell,armada-xp-wdt";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+ reg = <0x20800 0x20>;
+};
+
+&usb0 {
+ clocks = <&gateclk 18>;
+};
+
+&usb1 {
+ clocks = <&gateclk 19>;
+};
+
&pinctrl {
ge0_gmii_pins: ge0-gmii-pins {
marvell,pins =
--
2.10.2
More information about the linux-arm-kernel
mailing list