[PATCH 17/31] ARM: dts: sk-rzg1m: add Ether support

Simon Horman horms+renesas at verge.net.au
Thu Nov 17 06:11:34 PST 2016


From: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

Define the SK-RZG1M board dependent part of the Ether device node.
Enable DHCP and NFS root  for the kernel booting.

Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin at cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
index ed26961c9434..3a22538208f2 100644
--- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -20,7 +20,7 @@
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -42,3 +42,16 @@
 &scif0 {
 	status = "okay";
 };
+
+&ether {
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy at 1 {
+		reg = <1>;
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
-- 
2.7.0.rc3.207.g0ac5344




More information about the linux-arm-kernel mailing list