[PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol
Russell King - ARM Linux
linux at armlinux.org.uk
Tue Nov 8 08:13:31 PST 2016
On Tue, Nov 08, 2016 at 04:08:38PM +0000, Sudeep Holla wrote:
> I will focus on this and see what's happening. I have issue with network
> on my setup with debug build and Linaro guys are not seeing it. I revert
> to release build of UEFI for that. Anyways one suggestion I have right
> now is to erase the second partition of NOR flash where the old UEFI
> config is placed and it could be conflicting with the new UEFI image.
>
> Cmd> flash
>
>
> Switching on main power...
> PMIC RAM configuration (pms_v105.bin)...
> IOFPGA config: PASSED
> Enabling usb remote...
>
>
> Flash> ERASERANGE 0x0BFC0000 0x0BFF0000
>
> I will looking into that further.
Still behaves the same, stopping at:
FV2 Hob 0xFE07B000 - 0xFE8253BF
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
More information about the linux-arm-kernel
mailing list