[PATCH 2/6] dt-bindings: clk: max8997: Add DT binding documentation

[Pankaj Dubey]

Add Device Tree binding documentation for the clocks
outputs in the Maxim-8997 Power Management IC.

CC: Michael Turquette <mturquette at baylibre.com>
CC: Rob Herring <robh+dt at kernel.org>
CC: devicetree at vger.kernel.org
CC: linux-clk at vger.kernel.org
Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
---
 .../devicetree/bindings/clock/maxim,max8997.txt    | 44 ++++++++++++++++++++++
 .../bindings/regulator/max8997-regulator.txt       |  3 ++
 2 files changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/maxim,max8997.txt

diff --git a/Documentation/devicetree/bindings/clock/maxim,max8997.txt b/Documentation/devicetree/bindings/clock/maxim,max8997.txt
new file mode 100644
index 0000000..d2e2a74
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max8997.txt
@@ -0,0 +1,44 @@
+Binding for Maxim MAX8997 32k clock generator block
+
+This is a part of device tree bindings of MAX8997 multi-function device.
+More information can be found in bindings/regulator/max8997-regulator.txt file.
+
+The MAX8997 contains two 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
+Following properties should be presend in main device node of the MFD chip.
+
+Required properties:
+
+- #clock-cells: from common clock binding; shall be set to 1.
+
+Optional properties:
+- clock-output-names: From common clock binding.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
+    - 0: 32khz_ap clock,
+    - 1: 32khz_cp clock,
+
+Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max8997.h
+header and can be used in device tree sources.
+
+Example: Node of the MFD chip
+
+	max8997: max8997_pmic at 66 {
+		compatible = "maxim,max8997-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 0>, <3 0>;
+		#clock-cells = <1>;
+		/* ... */
+	};
+
+Example: Clock consumer node
+
+	foo at 0 {
+		compatible = "bar,foo";
+		/* ... */
+		clocks = <&max8997 MAX8997_CLK_AP>;
+		clock-names = "my-clock";
+	};
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 5c186a7..af1f9c0 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -6,6 +6,9 @@ interfaced to the host controller using a i2c interface. Each sub-block is
 addressed by the host system using different i2c slave address. This document
 describes the bindings for 'pmic' sub-block of max8997.
 
+Binding for the built-in 32k clock generator block is defined separately
+in bindings/clk/maxim,max8997.txt file
+
 Required properties:
 - compatible: Should be "maxim,max8997-pmic".
 - reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
-- 
2.7.4