[PATCH V3 4/6] ARM: tegra: Add Tegra30 GMI support

[Jon Hunter]

On 27/10/16 15:01, Mirza Krak wrote:
> From: Mirza Krak <mirza.krak at gmail.com>
>
> Add a device node for the GMI controller found on Tegra30.
>
> Signed-off-by: Mirza Krak <mirza.krak at gmail.com>
> Tested-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board
> ---
>
> Changes in v2:
> - added address-cells, size-cells and ranges properties
>
> Changes in v3:
> - no changes
>
>  arch/arm/boot/dts/tegra30.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
> index 5030065..bbb1c00 100644
> --- a/arch/arm/boot/dts/tegra30.dtsi
> +++ b/arch/arm/boot/dts/tegra30.dtsi
> @@ -439,6 +439,19 @@
>  		status = "disabled";
>  	};
>
> +	gmi at 70009000 {
> +		compatible = "nvidia,tegra30-gmi";
> +		reg = <0x70009000 0x1000>;
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0x48000000 0x7ffffff>;
> +		clocks = <&tegra_car TEGRA30_CLK_NOR>;
> +		clock-names = "gmi";
> +		resets = <&tegra_car 42>;
> +		reset-names = "gmi";
> +		status = "disabled";
> +	};
> +

Acked-by: Jon Hunter <jonathanh at nvidia.com>

Cheers
Jon

-- 
nvpublic