[PATCH V7 08/11] pci, acpi: Support for ACPI based generic PCI host controller
Tomasz Nowicki
tn at semihalf.com
Mon May 23 04:34:08 PDT 2016
On 14.05.2016 11:07, Jayachandran C wrote:
> On Tue, May 10, 2016 at 8:49 PM, Tomasz Nowicki <tn at semihalf.com> wrote:
>> This patch is going to implement generic PCI host controller for
>> ACPI world, similar to what pci-host-generic.c driver does for DT world.
>>
>> All such drivers, which we have seen so far, were implemented within
>> arch/ directory since they had some arch assumptions (x86 and ia64).
>> However, they all are doing similar thing, so it makes sense to find
>> some common code and abstract it into the generic driver.
>>
>> In order to handle PCI config space regions properly, we define new
>> MCFG interface which does sanity checks on MCFG table and keeps its
>> root pointer. User is able to lookup MCFG regions based on that root
>> pointer and specified domain:bus_start:bus_end touple. We are using
>> pci_mmcfg_late_init old prototype to avoid another function name.
>>
>> The implementation of pci_acpi_scan_root() looks up the MCFG entries
>> and sets up a new mapping (regions are not mapped until host controller ask
>> for it). Generic PCI functions are used for accessing config space.
>> Driver selects PCI_ECAM and uses functions from drivers/pci/ecam.h
>> to create and access ECAM mappings.
>>
>> As mentioned in Kconfig help section, ACPI_PCI_HOST_GENERIC choice
>> should be made on a per-architecture basis.
>
> Looking thru the new code, I see a few issues, please see below
>
>> Signed-off-by: Tomasz Nowicki <tn at semihalf.com>
>> Signed-off-by: Jayachandran C <jchandra at broadcom.com>
>> ---
>> drivers/acpi/Kconfig | 8 +++
>> drivers/acpi/Makefile | 1 +
>> drivers/acpi/pci_mcfg.c | 97 ++++++++++++++++++++++++++
>> drivers/acpi/pci_root_generic.c | 149 ++++++++++++++++++++++++++++++++++++++++
>> drivers/pci/ecam.h | 5 ++
>> include/linux/pci-acpi.h | 5 ++
>> include/linux/pci.h | 5 +-
>> 7 files changed, 269 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/acpi/pci_mcfg.c
>> create mode 100644 drivers/acpi/pci_root_generic.c
>>
>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
>> index 183ffa3..44afc76 100644
>> --- a/drivers/acpi/Kconfig
>> +++ b/drivers/acpi/Kconfig
>> @@ -346,6 +346,14 @@ config ACPI_PCI_SLOT
>> i.e., segment/bus/device/function tuples, with physical slots in
>> the system. If you are unsure, say N.
>>
>> +config ACPI_PCI_HOST_GENERIC
>> + bool
>> + select PCI_ECAM
>> + help
>> + Select this config option from the architecture Kconfig,
>> + if it is preferred to enable ACPI PCI host controller driver which
>> + has no arch-specific assumptions.
>> +
>> config X86_PM_TIMER
>> bool "Power Management Timer Support" if EXPERT
>> depends on X86
>> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
>> index 81e5cbc..627a2b7 100644
>> --- a/drivers/acpi/Makefile
>> +++ b/drivers/acpi/Makefile
>> @@ -40,6 +40,7 @@ acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o
>> acpi-y += ec.o
>> acpi-$(CONFIG_ACPI_DOCK) += dock.o
>> acpi-y += pci_root.o pci_link.o pci_irq.o
>> +obj-$(CONFIG_ACPI_PCI_HOST_GENERIC) += pci_root_generic.o pci_mcfg.o
>> acpi-y += acpi_lpss.o acpi_apd.o
>> acpi-y += acpi_platform.o
>> acpi-y += acpi_pnp.o
>> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
>> new file mode 100644
>> index 0000000..373d079
>> --- /dev/null
>> +++ b/drivers/acpi/pci_mcfg.c
>> @@ -0,0 +1,97 @@
>> +/*
>> + * Copyright (C) 2016 Broadcom
>> + * Author: Jayachandran C <jchandra at broadcom.com>
>> + * Copyright (C) 2016 Semihalf
>> + * Author: Tomasz Nowicki <tn at semihalf.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License, version 2, as
>> + * published by the Free Software Foundation (the "GPL").
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * General Public License version 2 (GPLv2) for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * version 2 (GPLv2) along with this source code.
>> + */
>> +#include <linux/kernel.h>
>> +#include <linux/pci.h>
>> +#include <linux/pci-acpi.h>
>> +
>> +#define PREFIX "ACPI: "
>> +
>> +/* Root pointer to the mapped MCFG table */
>> +static struct acpi_table_mcfg *mcfg_table;
>> +
>> +#define MCFG_ENTRIES(mcfg_ptr) (((mcfg_ptr)->header.length - \
>> + sizeof(struct acpi_table_mcfg)) / \
>> + sizeof(struct acpi_mcfg_allocation))
>
> It would be better if you used static inline function here.
OK
>
>> +static phys_addr_t pci_mcfg_lookup_static(u16 seg, u8 bus_start, u8 bus_end)
>> +{
>> + struct acpi_mcfg_allocation *mptr;
>> + int i;
>> +
>> + if (!mcfg_table) {
>> + pr_err(PREFIX "MCFG table not available, lookup failed\n");
>> + return -ENXIO;
>> + }
>> +
>> + mptr = (struct acpi_mcfg_allocation *) &mcfg_table[1];
>> +
>> + /*
>> + * We expect exact match, unless MCFG entry end bus covers more than
>> + * specified by caller.
>> + */
>> + for (i = 0; i < MCFG_ENTRIES(mcfg_table); i++, mptr++) {
>> + if (mptr->pci_segment == seg &&
>> + mptr->start_bus_number == bus_start &&
>> + mptr->end_bus_number >= bus_end) {
>> + return mptr->address;
>> + }
>> + }
>
> There is an issue here, the bus range is obtained if different
> ways. If the _CRS has it, this should be fine. But if it is _BBN-0xff
> or the default 0-0xff, then I would think taking the MCFG entry end
> would be better. This would require updating the bus resource end.
Yeah we can implement algorithm like that but IMO it would try to guess
what FW designer meant putting various combination of BUS resources into
the tables. We should rather be strict about this so I agree with Bjorn:
https://lkml.org/lkml/2016/4/28/807
Either we get exact match or MCFG covers more than the host bridge range.
Host bridge bus range definition -> MCFG
_BBN-0xff -> we expect exact _BBN-0xff match
0-0xff -> ditto
_CRS (the only way to trim host bridge bus rage) -> exact match or MCFG
covers more
>
> Also (trivial), the braces are not needed.
OK
>
>> + return -ENXIO;
>> +}
>> +
>> +phys_addr_t pci_mcfg_lookup(struct acpi_device *device, u16 seg,
>> + struct resource *bus_res)
>> +{
>> + phys_addr_t addr;
>> +
>> + addr = acpi_pci_root_get_mcfg_addr(device->handle);
>> + if (addr)
>> + return addr;
>
> When you have address from _CBA, you are assuming that the
> bus range is also set correctly (from _CRS or as _BBN-0xff). Is
> this assumption correct?
I think so, see above. Maybe Bjorn may advise here.
>
> (this was discussed earlier) you are doing the _CBA call again,
> I think cleaning up the _CBA, _BBN, _CRS and MCFG based
> ECAM area resources and defaults should be a different patch,
> which would need changes to pci_root.c. We should use
> root->mcfg_addr in this patchset.
OK
>
>> +
>> + return pci_mcfg_lookup_static(seg, bus_res->start, bus_res->end);
>
> There is no need to have a separate function for this, based on by
> above comment, you might need to change bus_res, so having it here
> would be better.
>
>> +}
>> +
>> +static __init int pci_mcfg_parse(struct acpi_table_header *header)
>> +{
>> + struct acpi_table_mcfg *mcfg;
>> + int n;
>> +
>> + if (!header)
>> + return -EINVAL;
>
> This is not needed, the handler is not called if header is NULL
OK
>
>> +
>> + mcfg = (struct acpi_table_mcfg *)header;
>> + n = MCFG_ENTRIES(mcfg);
>> + if (n <= 0 || n > 255) {
>> + pr_err(PREFIX "MCFG has incorrect entries (%d).\n", n);
>> + return -EINVAL;
>> + }
>>
>> + mcfg_table = mcfg;
>
> Saving a reference of ACPI mapping seems dangerous, acpi_parse_table
> calles early_acpi_os_unmap_memory() after calling handler, which does
> not do anything since acpi_gbl_permanent_mmap is set.
>
> I would suggest copying the entries.
You got the point about early_acpi_os_unmap_memory but that would be the
case if we call pci_mmcfg_late_init before acpi_early_init. But
pci_mmcfg_late_init is called much later. Also the code is much simpler
as is now.
Thanks,
Tomasz
More information about the linux-arm-kernel
mailing list