[PATCH v3 3/6] ARM: dts: r8a7794: add MSTP10 clocks

[Simon Horman]

On Thu, May 19, 2016 at 09:36:27PM +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 05/19/2016 08:41 PM, Geert Uytterhoeven wrote:
> 
> >>>>--- renesas.orig/include/dt-bindings/clock/r8a7794-clock.h
> >>>>+++ renesas/include/dt-bindings/clock/r8a7794-clock.h
> >>>>@@ -109,6 +109,34 @@
> >>>> #define R8A7794_CLK_I2C1               30
> >>>> #define R8A7794_CLK_I2C0               31
> >>>>
> >>>>+/* MSTP10 */
> >>>>+#define R8A7794_CLK_SSI_ALL            5
> >>>>+#define R8A7794_CLK_SSI9               6
> >>>>+#define R8A7794_CLK_SSI8               7
> >>>>+#define R8A7794_CLK_SSI7               8
> >>>>+#define R8A7794_CLK_SSI6               9
> >>>>+#define R8A7794_CLK_SSI5               10
> >>>>+#define R8A7794_CLK_SSI4               11
> >>>>+#define R8A7794_CLK_SSI3               12
> >>>>+#define R8A7794_CLK_SSI2               13
> >>>>+#define R8A7794_CLK_SSI1               14
> >>>>+#define R8A7794_CLK_SSI0               15
> >>>>+#define R8A7794_CLK_SCU_ALL            17
> >>>>+#define R8A7794_CLK_SCU_DVC1           18
> >>>>+#define R8A7794_CLK_SCU_DVC0           19
> >>>>+#define R8A7794_CLK_SCU_CTU1_MIX1      20
> >>>>+#define R8A7794_CLK_SCU_CTU0_MIX0      21
> >>>>+#define R8A7794_CLK_SCU_SRC9           22
> >>>>+#define R8A7794_CLK_SCU_SRC8           23
> >>>>+#define R8A7794_CLK_SCU_SRC7           24
> >>>
> >>>
> >>>R-Car E2 does not have SRC7, SRC8, SRC9, ...
> >>>
> >>>>+#define R8A7794_CLK_SCU_SRC6           25
> >>>>+#define R8A7794_CLK_SCU_SRC5           26
> >>>>+#define R8A7794_CLK_SCU_SRC4           27
> >>>>+#define R8A7794_CLK_SCU_SRC3           28
> >>>>+#define R8A7794_CLK_SCU_SRC2           29
> >>>>+#define R8A7794_CLK_SCU_SRC1           30
> >>>>+#define R8A7794_CLK_SCU_SRC0           31
> >>>
> >>>
> >>>... and SRC0.
> >>
> >>
> >>   Yet table 7A.12 in the rev1.02 manual lists them all. Your manual
> >>doesn't?
> >
> >I thought you were aware of this, cfr. your "[PATCH] rcar: src: skip
> >disabled-SRC nodes"?
> 
>    I am, I was just pointing out that this patch was backed by the manual I
> had...

It looks like the manual is incorrect in this regard.
Please update the patch as Geert suggests.

> >Gr{oetje,eeting}s,
> >
> >                        Geert
> 
> MBR, Sergei
>