[PATCH v9 0/8] KVM PCIe/MSI passthrough on ARM/ARM64: kernel part 2/3: msi changes

Eric Auger eric.auger at linaro.org
Tue May 10 00:34:56 PDT 2016


Hi Chalamarla,
> On 5/9/16, 12:48 AM, "Eric Auger" <eric.auger at linaro.org> wrote:
> 
>> Hi Chalarmala,
>> On 05/05/2016 07:44 PM, Chalamarla, Tirumalesh wrote:
>>> Hi Eric,
>>>
>>> Does this series supports gicv3-its emulation?
>>> Do we have a tree with all the dependent patches
>> GICv3 ITS emulation support comes with:
>> [PATCH v4 00/12] KVM: arm64: GICv3 ITS emulation
>> http://permalink.gmane.org/gmane.comp.emulators.kvm.arm.devel/5738
>>
>> My series just allows PCI device MSI transactions to reach the host MSI
>> frame through the SMMU. Only host GICv2m has been tested at the moment
>> with a guest exposed with a GICv2m too.
> 
> 
> I wanted to test this series on Cavium Thunder, but the only mode supported is Gicv3 with ITS, is there a chance 
> That I get a tree with all the dependencies?
I can prepare a kernel tree with all the dependencies including ITS
patches supporting get_doorbell_info.

Then on userspace side:
- do you plan to use QEMU?
- then can you expose your guest with a GICv3 + v2m? I think this should
work.

exposing ITS to the guest requires a respin of Pavel's series:
[Qemu-devel] [RFC PATCH v3 0/5] vITS support
(https://lists.gnu.org/archive/html/qemu-devel/2015-11/msg05197.html)
and has more complex kernel dependencies.

I think exposing the guest with GICv3 + v2m should work

Best Regards

Eric
>>> Thanks,
>>> Tirumalesh. 
>>> On 5/4/16, 8:18 AM, "linux-arm-kernel on behalf of Eric Auger" <linux-arm-kernel-bounces at lists.infradead.org on behalf of eric.auger at linaro.org> wrote:
>>>
>>>> This series implements the MSI address mapping/unmapping in the MSI layer.
>>>> IOMMU binding happens on pci_enable_msi since this function can sleep and
>>>> return errors. On msi_domain_set_affinity, msi_domain_(de)activate, which
>>>> are not allowed to sleep, we simply look for the already existing binding.
>>>>
>>>> A new MSI domain info flag value is introduced to report whether the msi
>>>> domain implements IRQ remapping. GIC v3 ITS is the first MSI controller
>>>> advertising it. This flag value will be used by VFIO subsystem to
>>>> determine whether MSI forwarding is safe.
>>>>
>>>> More details & context can be found at:
>>>> http://www.linaro.org/blog/core-dump/kvm-pciemsi-passthrough-armarm64/
>>>>
>>>> Best Regards
>>>>
>>>> Eric
>>>>
>>>> Applies on top of PART 1/3. Also depends on
>>>> [PATCH 1/3] iommu: Add MMIO mapping type,
>>>> http://comments.gmane.org/gmane.linux.kernel.iommu/12869
>>>>
>>>> Git: complete series available at
>>>> https://git.linaro.org/people/eric.auger/linux.git/shortlog/refs/heads/v4.6-rc6-pcie-passthrough-v9-msi-v9
>>>>
>>>> This branch contains all parts in v9.
>>>>
>>>> History:
>>>>
>>>> v8 -> v9:
>>>> - use a union in irq_chip_msi_doorbell_info + boolean telling whether the
>>>>  doorbell is percpu
>>>> - decouple irq_data parsing from the actual mapping/unmapping in
>>>>  msi_handle_doorbell_mappings
>>>> - fix misc style issues
>>>>
>>>> v7 -> v8:
>>>> take into account Marc's comments:
>>>> - use iommu_msi_msg_pa_to_va with new proto
>>>> - change in irq_chip_msi_doorbell_info struct definition:
>>>>  prot and size became shared between all doorbells and phys_addr_t __percpu
>>>> - cleanups in v2m irqchip
>>>> - eventually did not touch MSI_FLAG_IRQ_REMAPPING naming
>>>> - On msi_handle_doorbell_mappings, stop on the first irqchip where doorbells
>>>>  can be found
>>>> - fix resource deallocation on mapping failure in msi_domain_alloc_irqs
>>>>
>>>> v6 -> v7:
>>>> - do alloc/map handling on pci_enable_msi and search on msi_(de)domain_activate
>>>> - add msi_doorbell_info callback in irq-chip to retrieve the characteristics
>>>>  of doorbells
>>>>
>>>> RFC v5 -> patch v6:
>>>> - split to ease the review process
>>>> - rebase on default iommu domain code (irq_data_to_msi_mapping_domain
>>>>  checks IOMMU_DOMAIN_DMA type)
>>>> - fix unmap sequence on msi_domain_set_affinity (reported by Marc):
>>>>  unmap the previous doorbell when the new one has been mapped & written to
>>>>  the device, ie. irq_chip_write_msi_msg.
>>>> - "msi: msi_compose wrapper removed" following change above
>>>> - add size parameter to iommu_get_reserved_iova API following Marc's request
>>>>
>>>> RFC v4 -> RFC v5:
>>>> - take into account Thomas' comments on MSI related patches
>>>>  - split "msi: IOMMU map the doorbell address when needed"
>>>>  - increase readability and add comments
>>>>  - fix style issues
>>>> - split "iommu: Add DOMAIN_ATTR_MSI_MAPPING attribute"
>>>> - platform ITS now advertises IOMMU_CAP_INTR_REMAP
>>>> - fix compilation issue with CONFIG_IOMMU API unset
>>>> - arm-smmu-v3 now advertises DOMAIN_ATTR_MSI_MAPPING
>>>>
>>>> RFC v3 -> v4:
>>>> - Move doorbell mapping/unmapping in msi.c
>>>> - fix ref count issue on set_affinity: in case of a change in the address
>>>>  the previous address is decremented
>>>> - doorbell map/unmap now is done on msi composition. Should allow the use
>>>>  case for platform MSI controllers
>>>> - create dma-reserved-iommu.h/c exposing/implementing a new API dedicated
>>>>  to reserved IOVA management (looking like dma-iommu glue)
>>>> - series reordering to ease the review:
>>>>  - first part is related to IOMMU
>>>>  - second related to MSI sub-system
>>>>  - third related to VFIO (except arm-smmu IOMMU_CAP_INTR_REMAP removal)
>>>> - expose the number of requested IOVA pages through VFIO_IOMMU_GET_INFO
>>>>  [this partially addresses Marc's comments on iommu_get/put_single_reserved
>>>>   size/alignment problematic - which I did not ignore - but I don't know
>>>>   how much I can do at the moment]
>>>>
>>>> RFC v2 -> RFC v3:
>>>> - should fix wrong handling of some CONFIG combinations:
>>>>  CONFIG_IOVA, CONFIG_IOMMU_API, CONFIG_PCI_MSI_IRQ_DOMAIN
>>>> - fix MSI_FLAG_IRQ_REMAPPING setting in GICv3 ITS (although not tested)
>>>>
>>>> PATCH v1 -> RFC v2:
>>>> - reverted to RFC since it looks more reasonable ;-) the code is split
>>>>  between VFIO, IOMMU, MSI controller and I am not sure I did the right
>>>>  choices. Also API need to be further discussed.
>>>> - iova API usage in arm-smmu.c.
>>>> - MSI controller natively programs the MSI addr with either the PA or IOVA.
>>>>  This is not done anymore in vfio-pci driver as suggested by Alex.
>>>> - check irq remapping capability of the group
>>>>
>>>> RFC v1 [2] -> PATCH v1:
>>>> - use the existing dma map/unmap ioctl interface with a flag to register a
>>>>  reserved IOVA range. Use the legacy Rb to store this special vfio_dma.
>>>> - a single reserved IOVA contiguous region now is allowed
>>>> - use of an RB tree indexed by PA to store allocated reserved slots
>>>> - use of a vfio_domain iova_domain to manage iova allocation within the
>>>>  window provided by the userspace
>>>> - vfio alloc_map/unmap_free take a vfio_group handle
>>>> - vfio_group handle is cached in vfio_pci_device
>>>> - add ref counting to bindings
>>>> - user modality enabled at the end of the series
>>>>
>>>>
>>>> Eric Auger (8):
>>>>  genirq/msi: Add a new MSI_FLAG_IRQ_REMAPPING flag
>>>>  irqchip/gic-v3-its: ITS advertises MSI_FLAG_IRQ_REMAPPING
>>>>  genirq/msi: export msi_get_domain_info
>>>>  genirq/msi: msi_compose wrapper
>>>>  genirq/irq: introduce msi_doorbell_info
>>>>  irqchip/gicv2m: implement msi_doorbell_info callback
>>>>  genirq/msi: map/unmap the MSI doorbells on msi_domain_alloc/free_irqs
>>>>  genirq/msi: use the MSI doorbell's IOVA when requested
>>>>
>>>> drivers/irqchip/irq-gic-v2m.c                 |  16 +++
>>>> drivers/irqchip/irq-gic-v3-its-pci-msi.c      |   3 +-
>>>> drivers/irqchip/irq-gic-v3-its-platform-msi.c |   3 +-
>>>> include/linux/irq.h                           |  15 ++-
>>>> include/linux/msi.h                           |   2 +
>>>> kernel/irq/msi.c                              | 136 +++++++++++++++++++++++---
>>>> 6 files changed, 161 insertions(+), 14 deletions(-)
>>>>
>>>> -- 
>>>> 1.9.1
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> linux-arm-kernel at lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>




More information about the linux-arm-kernel mailing list