[V2, 1/2] drivers: i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled
Naveen Kaje
nkaje at codeaurora.org
Fri May 6 10:36:17 PDT 2016
On 5/6/2016 5:31 AM, Sricharan R wrote:
> With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen,
>
> ------------[ cut here ]------------
> kernel BUG at include/linux/scatterlist.h:140!
> Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7
> Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
> task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000
> PC is at qup_sg_set_buf.isra.13+0x138/0x154
> LR is at qup_sg_set_buf.isra.13+0x50/0x154
> pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145
> sp : ffffffc0368735c0
> x29: ffffffc0368735c0 x28: ffffffc036873752
> x27: ffffffc035233018 x26: ffffffc000c4e000
> x25: 0000000000000000 x24: 0000000000000004
> x23: 0000000000000000 x22: ffffffc035233668
> x21: ffffff80004e3000 x20: ffffffc0352e0018
> x19: 0000004000000000 x18: 0000000000000028
> x17: 0000000000000004 x16: ffffffc0017a39c8
> x15: 0000000000001cdf x14: ffffffc0019929d8
> x13: ffffffc0352e0018 x12: 0000000000000000
> x11: 0000000000000001 x10: 0000000000000001
> x9 : ffffffc0012b2d70 x8 : ffffff80004e3000
> x7 : 0000000000000018 x6 : 0000000030000000
> x5 : ffffffc00199f018 x4 : ffffffc035233018
> x3 : 0000000000000004 x2 : 00000000c0000000
> x1 : 0000000000000003 x0 : 0000000000000000
>
> Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020)
> Stack: (0xffffffc0368735c0 to 0xffffffc036874000)
>
> Change allocation of sg buffers from dma_coherent memory to kzalloc
> to fix the issue.
>
> Signed-off-by: Sricharan R <sricharan at codeaurora.org>
> Reviewed-by: Andy Gross <andy.gross at linaro.org>
Tested on QDF2432 with ACPI and SMBus support patches for regressions.
Note that this platform does not use DMA mode.
Tested-by: Naveen Kaje <nkaje at codeaurora.org>
> ---
> drivers/i2c/busses/i2c-qup.c | 53 ++++++++++++++------------------------------
> 1 file changed, 17 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
> index 23eaabb..8620e99 100644
> --- a/drivers/i2c/busses/i2c-qup.c
> +++ b/drivers/i2c/busses/i2c-qup.c
> @@ -585,8 +585,8 @@ static void qup_i2c_bam_cb(void *data)
> }
>
> static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
> - struct qup_i2c_tag *tg, unsigned int buflen,
> - struct qup_i2c_dev *qup, int map, int dir)
> + unsigned int buflen, struct qup_i2c_dev *qup,
> + int dir)
> {
> int ret;
>
> @@ -595,9 +595,6 @@ static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
> if (!ret)
> return -EINVAL;
>
> - if (!map)
> - sg_dma_address(sg) = tg->addr + ((u8 *)buf - tg->start);
> -
> return 0;
> }
>
> @@ -670,16 +667,15 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
> /* scratch buf to read the start and len tags */
> ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
> &qup->brx.tag.start[0],
> - &qup->brx.tag,
> - 2, qup, 0, 0);
> + 2, qup, DMA_FROM_DEVICE);
>
> if (ret)
> return ret;
>
> ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
> &msg->buf[limit * i],
> - NULL, tlen, qup,
> - 1, DMA_FROM_DEVICE);
> + tlen, qup,
> + DMA_FROM_DEVICE);
> if (ret)
> return ret;
>
> @@ -688,7 +684,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
> }
> ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
> &qup->start_tag.start[off],
> - &qup->start_tag, len, qup, 0, 0);
> + len, qup, DMA_TO_DEVICE);
> if (ret)
> return ret;
>
> @@ -696,8 +692,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
> /* scratch buf to read the BAM EOT and FLUSH tags */
> ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
> &qup->brx.tag.start[0],
> - &qup->brx.tag, 2,
> - qup, 0, 0);
> + 2, qup, DMA_FROM_DEVICE);
> if (ret)
> return ret;
> } else {
> @@ -709,17 +704,15 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
> len = qup_i2c_set_tags(tags, qup, msg, 1);
>
> ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
> - tags,
> - &qup->start_tag, len,
> - qup, 0, 0);
> + tags, len,
> + qup, DMA_TO_DEVICE);
> if (ret)
> return ret;
>
> tx_len += len;
> ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
> &msg->buf[limit * i],
> - NULL, tlen, qup, 1,
> - DMA_TO_DEVICE);
> + tlen, qup, DMA_TO_DEVICE);
> if (ret)
> return ret;
> i++;
> @@ -738,8 +731,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
> QUP_BAM_FLUSH_STOP;
> ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
> &qup->btx.tag.start[0],
> - &qup->btx.tag, len,
> - qup, 0, 0);
> + len, qup, DMA_TO_DEVICE);
> if (ret)
> return ret;
> tx_nents += 1;
> @@ -1268,6 +1260,8 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
> }
> }
>
> + idx = 0;
> +
> do {
> if (msgs[idx].len == 0) {
> ret = -EINVAL;
> @@ -1407,27 +1401,21 @@ static int qup_i2c_probe(struct platform_device *pdev)
>
> /* 2 tag bytes for each block + 5 for start, stop tags */
> size = blocks * 2 + 5;
> - qup->dpool = dma_pool_create("qup_i2c-dma-pool", &pdev->dev,
> - size, 4, 0);
>
> - qup->start_tag.start = dma_pool_alloc(qup->dpool, GFP_KERNEL,
> - &qup->start_tag.addr);
> + qup->start_tag.start = devm_kzalloc(&pdev->dev,
> + size, GFP_KERNEL);
> if (!qup->start_tag.start) {
> ret = -ENOMEM;
> goto fail_dma;
> }
>
> - qup->brx.tag.start = dma_pool_alloc(qup->dpool,
> - GFP_KERNEL,
> - &qup->brx.tag.addr);
> + qup->brx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
> if (!qup->brx.tag.start) {
> ret = -ENOMEM;
> goto fail_dma;
> }
>
> - qup->btx.tag.start = dma_pool_alloc(qup->dpool,
> - GFP_KERNEL,
> - &qup->btx.tag.addr);
> + qup->btx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
> if (!qup->btx.tag.start) {
> ret = -ENOMEM;
> goto fail_dma;
> @@ -1566,13 +1554,6 @@ static int qup_i2c_remove(struct platform_device *pdev)
> struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
>
> if (qup->is_dma) {
> - dma_pool_free(qup->dpool, qup->start_tag.start,
> - qup->start_tag.addr);
> - dma_pool_free(qup->dpool, qup->brx.tag.start,
> - qup->brx.tag.addr);
> - dma_pool_free(qup->dpool, qup->btx.tag.start,
> - qup->btx.tag.addr);
> - dma_pool_destroy(qup->dpool);
> dma_release_channel(qup->btx.dma);
> dma_release_channel(qup->brx.dma);
> }
More information about the linux-arm-kernel
mailing list