[PATCH v6 02/11] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
Rajendra Nayak
rnayak at codeaurora.org
Thu May 5 01:51:40 PDT 2016
Add support to calibrate sensors on 8916 family and also add common
functions to read temperature from sensors (This can be reused on
other SoCs having similar TSENS device)
The calibration data is read from eeprom using the generic nvmem
framework apis.
Based on the original code by Siddartha Mohanadoss and Stephen Boyd.
Signed-off-by: Rajendra Nayak <rnayak at codeaurora.org>
---
drivers/thermal/qcom/Makefile | 2 +-
drivers/thermal/qcom/tsens-8916.c | 113 ++++++++++++++++++++++++++++++++++++++
drivers/thermal/qcom/tsens.c | 1 +
drivers/thermal/qcom/tsens.h | 2 +
4 files changed, 117 insertions(+), 1 deletion(-)
create mode 100644 drivers/thermal/qcom/tsens-8916.c
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index 2e800c5..05c98e4 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,2 +1,2 @@
obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
-qcom_tsens-y += tsens.o tsens-common.o
+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o
diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c
new file mode 100644
index 0000000..beb3afa
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-8916.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include "tsens.h"
+
+/* eeprom layout data for 8916 */
+#define BASE0_MASK 0x0000007f
+#define BASE1_MASK 0xfe000000
+#define BASE0_SHIFT 0
+#define BASE1_SHIFT 25
+
+#define S0_P1_MASK 0x00000f80
+#define S1_P1_MASK 0x003e0000
+#define S2_P1_MASK 0xf8000000
+#define S3_P1_MASK 0x000003e0
+#define S4_P1_MASK 0x000f8000
+
+#define S0_P2_MASK 0x0001f000
+#define S1_P2_MASK 0x07c00000
+#define S2_P2_MASK 0x0000001f
+#define S3_P2_MASK 0x00007c00
+#define S4_P2_MASK 0x01f00000
+
+#define S0_P1_SHIFT 7
+#define S1_P1_SHIFT 17
+#define S2_P1_SHIFT 27
+#define S3_P1_SHIFT 5
+#define S4_P1_SHIFT 15
+
+#define S0_P2_SHIFT 12
+#define S1_P2_SHIFT 22
+#define S2_P2_SHIFT 0
+#define S3_P2_SHIFT 10
+#define S4_P2_SHIFT 20
+
+#define CAL_SEL_MASK 0xe0000000
+#define CAL_SEL_SHIFT 29
+
+static int calibrate_8916(struct tsens_device *tmdev)
+{
+ int base0 = 0, base1 = 0, i;
+ u32 p1[5], p2[5];
+ int mode = 0;
+ u32 *qfprom_cdata, *qfprom_csel;
+
+ qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib");
+ if (IS_ERR(qfprom_cdata))
+ return PTR_ERR(qfprom_cdata);
+
+ qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel");
+ if (IS_ERR(qfprom_csel))
+ return PTR_ERR(qfprom_csel);
+
+ mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
+ dev_dbg(tmdev->dev, "calibration mode is %d\n", mode);
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT;
+ p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
+ p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
+ p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT;
+ p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
+ p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p2[i] = ((base1 + p2[i]) << 3);
+ /* Fall through */
+ case ONE_PT_CALIB2:
+ base0 = (qfprom_cdata[0] & BASE0_MASK);
+ p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+ p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+ p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+ p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
+ p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p1[i] = (((base0) + p1[i]) << 3);
+ break;
+ default:
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ p1[i] = 500;
+ p2[i] = 780;
+ }
+ break;
+ }
+
+ compute_intercept_slope(tmdev, p1, p2, mode);
+
+ return 0;
+}
+
+const struct tsens_ops ops_8916 = {
+ .init = init_common,
+ .calibrate = calibrate_8916,
+ .get_temp = get_temp_common,
+};
+
+const struct tsens_data data_8916 = {
+ .num_sensors = 5,
+ .ops = &ops_8916,
+ .hw_ids = (unsigned int []){0, 1, 2, 4, 5 },
+};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 17d7b55..7f3dfa1 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -65,6 +65,7 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
static const struct of_device_id tsens_table[] = {
{
.compatible = "qcom,msm8916-tsens",
+ .data = &data_8916,
}, {
.compatible = "qcom,msm8974-tsens",
},
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 3b1b6ae..e767ad5 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -87,4 +87,6 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
int init_common(struct tsens_device *);
int get_temp_common(struct tsens_device *, int, int *);
+extern const struct tsens_data data_8916;
+
#endif /* __QCOM_TSENS_H__ */
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
More information about the linux-arm-kernel
mailing list