[PATCH v8 3/9] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name

[Franklin S Cooper Jr]

Now that the node name has been changed from ehrpwm to pwm the document
should show this proper usage. Change the unit address in the example
from 0 to the proper physical address value that should be used. Also
insure that the unit address matches to the reg property.

Signed-off-by: Franklin S Cooper Jr <fcooper at ti.com>
Acked-by: Rob Herring <robh at kernel.org>
---
 Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 99b544f..f3bc09e 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -16,22 +16,22 @@ Optional properties:
 
 Example:
 
-ehrpwm0: ehrpwm at 0 { /* EHRPWM on am33xx */
+ehrpwm0: pwm at 48300200 { /* EHRPWM on am33xx */
 	compatible = "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
 	reg = <0x48300200 0x100>;
 	ti,hwmods = "ehrpwm0";
 };
 
-ehrpwm0: ehrpwm at 0 { /* EHRPWM on am4372 */
+ehrpwm0: pwm at 48300200 { /* EHRPWM on am4372 */
 	compatible = "ti,am4372-ehrpwm", "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
 	reg = <0x48300200 0x80>;
 	ti,hwmods = "ehrpwm0";
 };
 
-ehrpwm0: ehrpwm at 0 { /* EHRPWM on da850 */
+ehrpwm0: pwm at 1f00000 { /* EHRPWM on da850 */
 	compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
-	reg = <0x300000 0x2000>;
+	reg = <0x1f00000 0x2000>;
 };
-- 
2.7.0