[PATCH] ARM: dts: imx6sx-sdb: Add 198MHz operational point

[Shawn Guo]

On Thu, Apr 28, 2016 at 11:34:27PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
> 
> imx6sx-sdb has custom operating points entries because it has one
> power supply that drives both VDDARM_IN and VDDSOC_IN.
> 
> As per the MX6UL datasheet we have the following minimum voltages for
> 198 MHz operation (after adding the 25mV margin value):
> VDDARM_IN = 0.975 V
> VDDSOC_IN = 1.175 V
> 
> So use 1.175V for the 198MHz operation.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Applied, thanks.