[PATCH 5/7] ARM: dts: lpc4350-hitex-eval: fix unit name warnings from dtc

[Joachim Eastwood]

Fix the following warnings from dtc by either adding or removing
the unit name from the node.

Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /soc/flash-controller at 40003000/flash at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pca_buttons/button at 7 has a unit name, but no reg property

Signed-off-by: Joachim Eastwood <manabian at gmail.com>
---
 arch/arm/boot/dts/lpc4350-hitex-eval.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index 6d0c698..cb65352 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -33,7 +33,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory at 28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x800000>; /* 8 MB */
 	};
@@ -45,50 +45,50 @@
 		poll-interval = <100>;
 		autorepeat;
 
-		button at 0 {
+		button0 {
 			label = "joy:right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 1 {
+		button1 {
 			label = "joy:up";
 			linux,code = <KEY_UP>;
 			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
 		};
 
 
-		button at 2 {
+		button2 {
 			label = "joy:enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 3 {
+		button3 {
 			label = "joy:left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 4 {
+		button4 {
 			label = "joy:down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 5 {
+		button5 {
 			label = "user:sw3";
 			linux,code = <KEY_F1>;
 			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 6 {
+		button6 {
 			label = "user:sw4";
 			linux,code = <KEY_F2>;
 			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
 		};
 
-		button at 7 {
+		button7 {
 			label = "user:sw5";
 			linux,code = <KEY_F3>;
 			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
@@ -453,7 +453,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spifi_pins>;
 
-	flash at 0 {
+	flash {
 		compatible = "jedec,spi-nor";
 		spi-rx-bus-width = <4>;
 		#address-cells = <1>;
-- 
2.7.4