[RFC PATCH] arm64: Expose physical/virtual address bits through cpuinfo

[Kefeng Wang]

On 2016/3/18 20:13, Catalin Marinas wrote:
> On Thu, Mar 17, 2016 at 06:08:03PM +0800, Kefeng Wang wrote:
>> AArch64 support six types Physical Address range, permitted values
>> in ID_AA64MMFR0_EL1 are:
>> 0000  32 bits, 4GB.
>> 0001  36 bits, 64GB.
>> 0010  40 bits, 1TB.
>> 0011  42 bits, 4TB.
>> 0100  44 bits, 16TB.
>> 0101  48 bits, 256TB.
>> All other values are reserved.
>>
>> Meanwhile, AArch64 allows 36-bit, 39-bit, 42-bit, 47-bit and 48-bit
>> virtual addresses.
>>
>> Exposing the physical and virtual address bits to userspace through
>> procfs like x86, then it is easy to check them from cpuinfo.
> 
> So, what does user space need such information for?

For now, no user app use this, it just shows the physical/virtual address size
that is supported by cpu.

AArch64 supports several different types of physical/virtual address bits(up to 52bit
in ARMv8.2 especially), I think it's better to expose it, and cpuinfo is proper space.