[PATCH 24/30] ARM: dts: koelsch: Fix W=1 dtc warnings

Simon Horman horms+renesas at verge.net.au
Tue Jun 7 17:59:54 PDT 2016


From: Geert Uytterhoeven <geert+renesas at glider.be>

Warning (unit_address_vs_reg): Node /regulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 5 has a unit name, but no reg property

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index da59c2844b8a..20fbc8c36a78 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -170,7 +170,7 @@
 		};
 	};
 
-	vcc_sdhi0: regulator at 0 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -181,7 +181,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator at 1 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -194,7 +194,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi1: regulator at 2 {
+	vcc_sdhi1: regulator-vcc-sdhi1 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI1 Vcc";
@@ -205,7 +205,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi1: regulator at 3 {
+	vccq_sdhi1: regulator-vccq-sdhi1 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI1 VccQ";
@@ -218,7 +218,7 @@
 			  1800000 0>;
 	};
 
-	vcc_sdhi2: regulator at 4 {
+	vcc_sdhi2: regulator-vcc-sdhi2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI2 Vcc";
@@ -229,7 +229,7 @@
 		enable-active-high;
 	};
 
-	vccq_sdhi2: regulator at 5 {
+	vccq_sdhi2: regulator-vccq-sdhi2 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI2 VccQ";
-- 
2.1.4




More information about the linux-arm-kernel mailing list